Show simple item record

contributor authorJiang, Jishen
contributor authorXu, Bingqian
contributor authorWang, Weizhe
contributor authorAdjei, Richard Amankwa
contributor authorZhao, Xiaofeng
contributor authorLiu, Yingzheng
date accessioned2017-11-25T07:15:38Z
date available2017-11-25T07:15:38Z
date copyright2016/13/9
date issued2017
identifier issn0742-4795
identifier othergtp_139_02_022504.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4233608
description abstractFinite element simulations based on an interface cohesive zone model (CZM) have been developed to mimic the interfacial cracking behavior between the α−Al2O3 thermally grown oxide (TGO) and the aluminum-rich Pt–Al metallic bond coat (BC) during cooling from high temperature to ambient temperature. A two-dimensional half-periodic sinusoidal geometry corresponding to interface undulation is modeled. The effects of TGO thickness and interface asperity on the stress distribution and the cracking behavior are examined by parametric studies. The simulation results show that cracking behavior due to residual stress and interface asperity during cooling process leads to stress redistribution around the rough interface. The TGO thickness has strong influence on the maximum tensile stress of TGO and the interfacial crack development. For the sinusoidal asperities, there exists a critical amplitude above which the interfacial cracking is energetically favored. For any specific TGO thickness, crack initiation is dominated by the amplitude while crack propagation is restricted to the combine actions of the wavelength and the amplitude of the sinusoidal asperity.
publisherThe American Society of Mechanical Engineers (ASME)
titleFinite Element Analysis of the Effects of Thermally Grown Oxide Thickness and Interface Asperity on the Cracking Behavior Between the Thermally Grown Oxide and the Bond Coat
typeJournal Paper
journal volume139
journal issue2
journal titleJournal of Engineering for Gas Turbines and Power
identifier doi10.1115/1.4034259
journal fristpage22504
journal lastpage022504-9
treeJournal of Engineering for Gas Turbines and Power:;2017:;volume( 139 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record