Modeling the Thermal Effects of Artificial Turf on the Urban Environment

Abstract

The effects of artificial turf (AT) on the urban canopy layer energy balance, air and surface temperatures, and building cooling loads are compared to those of other common ground surface materials (asphalt, concrete, and grass) through heat transfer modeling of radiation, convection, and conduction. The authors apply the Temperatures of Urban Facets in 3D (TUF3D) model?modified to account for latent heat fluxes?to a clear summer day at a latitude of 33° over a typical coastal suburban area in Southern California. The low albedo of artificial turf relative to the other materials under investigation results in a reduction in shortwave radiation incident on nearby building walls and an approximately equal increase in longwave radiation. Consequently, building walls remain at a relatively cool temperature that is similar to those that are adjacent to irrigated grass surfaces. Using a simple offline convection model, replacing grass ground cover with artificial turf was found to add 2.3 kW h m?2 day?1 of heat to the atmosphere, which could result in urban air temperature increases of up to 4°C. Local effects of AT on building design cooling loads were estimated. The increased canopy air temperatures with AT increase heat conduction through the building envelope and ventilation in comparison with a building near irrigated grass. However, in this temperate climate these loads are small relative to the reduction in radiative cooling load through windows. Consequently, overall building design cooling loads near AT decrease by 15%?20%. In addition, the irrigation water conservation with AT causes an embodied energy savings of 10 W h m?2 day?1. Locally, this study points to a win?win situation for AT use for urban landscaping as it results in water and energy conservation.