Browsing Journal of Pressure Vessel Technology by Title
Now showing items 1-20 of 4337
-
10-Year Experience With T23(2.25Cr-1.6W) and T122(12Cr-0.4Mo-2W) in a Power Boiler
(The American Society of Mechanical Engineers (ASME), 2005)Tungsten strengthened ferritic steels, 2.25Cr-1.6W-V-Nb and 12Cr-0.4Mo-2W-V-Nb-Cu have been developed and approved by the ASME Boiler and Pressure Vessels Code Committee for use in Section I ... -
120 mm Prestressed Carbon Fiber/Thermoplastic Overwrapped Gun Tubes
(The American Society of Mechanical Engineers (ASME), 2012)The emphasis on lightweight large caliber weapons systems has placed the focus on the use of advanced composite materials. Using composite materials not only directly removes weight from the ... -
1988 Irwin Berman Lecture
(The American Society of Mechanical Engineers (ASME), 1989) -
1992 CALVIN RICE LECTURE: Some Curiosity-Driven Research in Fluid Structure Interactions and Its Current Applications
(The American Society of Mechanical Engineers (ASME), 1993) -
3-D Elastic Analysis of a Circular Nozzle Corner Crack
(The American Society of Mechanical Engineers (ASME), 1986)A 3-D linear elastic analysis has been performed for a circular crack located in the nozzle corner region of a nuclear pressure vessel. The stress intensity factor, K , was found to be ... -
3-D Finite Element Modeling of the Welding Process Using Element Birth and Element Movement Techniques
(The American Society of Mechanical Engineers (ASME), 2003)The modeling and simulation of the welding process has been of main concern for different fields of applications. Most of the modeling of such a problem has been mainly in 2-D forms that ... -
3-D Stress Intensity Factors for Internal Cracks in an Overstrained Cylindrical Pressure Vessel—Part I: The Effect of Autofrettage Level
(The American Society of Mechanical Engineers (ASME), 2000)Three-dimensional, mode I, stress intensity factor (SIF) distributions for arrays of internal surface cracks emanating from the bore of an autofrettaged thick-walled cylinder are evaluated in Part ... -
3-D Stress Intensity Factors for Internal Cracks in an Overstrained Cylindrical Pressure Vessel—Part II: The Combined Effect of Pressure and Autofrettage
(The American Society of Mechanical Engineers (ASME), 2001)KIA and KIP stress intensity factors (SIF) for three-dimensional semi-elliptical, surface, radial cracks prevailing in a pressurized or autofrettaged thick-walled cylinder were evaluated and discussed ... -
3D Modeling of Fluid-Structure Interaction With External Flow Using Coupled LBM and FEM
(The American Society of Mechanical Engineers (ASME), 2008)Three-dimensional fluid-structure interaction was modeled using the coupled lattice Boltzmann and finite element methods. The latter technique was applied to model a structural behavior while the ... -
60th Birthday of JPVT Associate Technical Editor Karl Kussmaul
(The American Society of Mechanical Engineers (ASME), 1990) -
A 3-D Model for Evaluating the Residual Stress Field Due to Swage Autofrettage
(The American Society of Mechanical Engineers (ASME), 2008)In order to maximize the performance of modern gun barrels in terms of strength-to-weight ratio and total fatigue life, favorable compressive residual stresses are introduced to the inner portion ... -
A Baseline and Vision of Ultrasonic Guided Wave Inspection Potential
(The American Society of Mechanical Engineers (ASME), 2002)Ultrasonic guided wave inspection is expanding rapidly to many different areas of manufacturing and in-service inspection. The purpose of this paper is to provide a vision of ultrasonic guided ... -
A Basis for Selecting the Most Appropriate Small Specimen Creep Test Type
(The American Society of Mechanical Engineers (ASME), 2014)Many components in conventional and nuclear power plant, aeroengines, chemical plant etc., operate at temperatures which are high enough for creep to occur. These include plain pipes, pipe bends, branched pipes etc., the ... -
A Boundary Integral Analysis of Lugs Attached to Cylindrical Pressure Vessels
(The American Society of Mechanical Engineers (ASME), 1988)Integral equations are derived to calculate the stresses and displacements in the neighborhood of a load-carrying rigid attachment in a shallow cylindrical shell. The integral equation formulation ... -
A Boundary Integral Approach to Attachment/Spherical Shell Interaction
(The American Society of Mechanical Engineers (ASME), 1997)In pressure vessel applications, the accurate evaluation of the state of stress in the vicinity of nozzles or rigid attachments is of vital importance to the structural integrity of the vessel. ... -
A Box-Type Construction Tubesheet
(The American Society of Mechanical Engineers (ASME), 1991) -
A Burst Capacity Model for Corroded Pipelines Subjected to Combined Internal Pressure and Longitudinal Compression
(The American Society of Mechanical Engineers (ASME), 2021)The present study proposes a new semi-empirical burst capacity model for corroded oil and gas pipelines under combined internal pressure and longitudinal compression. The proposed model evaluates the burst capacity of a ... -
A Case Study of a Proposed Monitor for Industrial Process Fouling
(The American Society of Mechanical Engineers (ASME), 1996)Fouling of a piping system refers to the formation of deposits on pipe walls, which can severely impede fluid flow. The food, dairy, and chemical processing industries usually combat the fouling ... -
A Case Study of Feedwater Heater Life Management
(The American Society of Mechanical Engineers (ASME), 1998)In the late nineteen eighties, electric utility companies, such as Kansas City Power and Light (KCPL), recognized the viability of extending the life of power plants by repairing or replacing ... -
A Cell Based Smoothed Radial Point Interpolation—Perfectly Matched Layer Method For Two Dimensional Acoustic Radiation Problems
(The American Society of Mechanical Engineers (ASME), 2016)We present a cellbased smoothed radial point interpolation method (CSRPIM) model for twodimensional acoustic radiating problem by incorporating the perfectly matched layer method (PML). In this work, the computational ...