| description abstract | Thermal performance of solar air heater does not take into account the energy loss due to friction for propelling air through the duct. In this work, an experimental investigation has been carried out to study the effect of heat transfer and friction characteristics of turbulent flow of air passing through rectangular duct which is roughened by circular arcs having gaps of 2 mm in between arranged in angular fashion, and the roughened wall is uniformly heated. The thermal and friction characteristics are governed by duct aspect ratio (W/H), hydraulic diameter (D), and relative roughness pitch (P/e), angle of attack of angular arc (خ±), and Reynolds number (Re). Experiments encompassed the Reynolds number ranges from 3600 to 15,100, P/e ranges from 6 to 20, and angle of attack of angular arc of flow over the protrusions ranges from 15 deg to 75 deg. The results have also been compared to Wshaped roughness inclined at 45 deg. The maximum enhancement in heat transfer and friction factor is 3.15 and 3.93 times as compared with smooth duct. Arc with gaps have also been observed to be better than their Wshaped counterparts. These experimental results have been used to study their influence on Nusselt number and friction factor, and empirical relations have been derived using regression analysis. | |
