Mechanistic Modeling For Size Selective Removal of Fines or Crystals From Thin Beds

Abstract

Recently developed laboratory and numerical techniques reveal that the very thin, nearwall (assumed) “laminarâ€‌ fluid layer, an essential feature of all turbulent flow conditions, houses a world of identifiable jetlike structures including bursts generated from the nearwall regions and lumps of fluids projected back onto the wall zones. This activity, identified as “coherent structuresâ€‌ (CS), is recognized as an important mechanism for radial mass transport and energy dissipation, particularly in nearwall or fluid–bed zones. Buoyancy, adhesion, hydrodynamic, and CSrelated updraft forces act on particles positioned in the fluid–bed interface zone. Depending on the particle nature, bulk fluid properties, and transport velocity, three pairs of forces were identified corresponding to the equilibrium condition of deposit particles in each of the three size ranges with respect to the onset of entrainment into the bulk flow. This mechanistic approach using a set of force equilibrium equations to assess the potential entrainment of particles was first suggested in 1980 by Phillips and was later (2006) applied by Toma and a research team from ARC and PETRONAS to explain the aging of walldeposit layer occurring during waxy crude transportation as an effect of sizeselective removal of paraffin crystals formed from a mixture of crystalized alkanes. The merit of this paper, regarded as an extension of the 2006 publication, is to introduce a more general selective extraction rate function that enables calculations of both the rate of paraffin aging and size alteration of any fine, polydisperse particulate matter exposed to bulk turbulent flow, gas or liquid. Without any adjustment of the process or physical constants, the modeling results presented in this paper compared satisfactorily with the experimental results obtained independently by the Texaco Research (aging of waxy crude) and laboratory data from the University of Alberta on the effect of sizeselective extraction of fine sand or glass beads (GB) initially deposited on the bottom of a pipe and exposed to a turbulent bulk flow of water. An overarching objective of this paper is to stir interest in mechanistic modeling and prediction of sizeselective radial transport and separation for a broad range of industrial and environmental applications and studies and specifically in the recognition and use of burstsweep CS structures for calculating radial transport of small particle sizes, particularly in nearinterface zones exposed to turbulent flow conditions.