Show simple item record

contributor authorSerrancolأ­, Gil
contributor authorKinney, Allison L.
contributor authorFregly, Benjamin J.
contributor authorFont
date accessioned2017-05-09T01:26:15Z
date available2017-05-09T01:26:15Z
date issued2016
identifier issn0148-0731
identifier otherfe_138_11_111101.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/160432
description abstractThough walking impairments are prevalent in society, clinical treatments are often ineffective at restoring lost function. For this reason, researchers have begun to explore the use of patientspecific computational walking models to develop more effective treatments. However, the accuracy with which models can predict internal body forces in muscles and across joints depends on how well relevant model parameter values can be calibrated for the patient. This study investigated how knowledge of internal knee contact forces affects calibration of neuromusculoskeletal model parameter values and subsequent prediction of internal knee contact and leg muscle forces during walking. Model calibration was performed using a novel twolevel optimization procedure applied to six normal walking trials from the Fourth Grand Challenge Competition to Predict In Vivo Knee Loads. The outerlevel optimization adjusted timeinvariant model parameter values to minimize passive muscle forces, reserve actuator moments, and model parameter value changes with (Approach A) and without (Approach B) tracking of experimental knee contact forces. Using the current guess for model parameter values but no knee contact force information, the innerlevel optimization predicted timevarying muscle activations that were close to experimental muscle synergy patterns and consistent with the experimental inverse dynamic loads (both approaches). For all the six gait trials, Approach A predicted knee contact forces with high accuracy for both compartments (average correlation coefficient r = 0.99 and root mean square error (RMSE) = 52.6 N medial; average r = 0.95 and RMSE = 56.6 N lateral). In contrast, Approach B overpredicted contact force magnitude for both compartments (average RMSE = 323 N medial and 348 N lateral) and poorly matched contact force shape for the lateral compartment (average r = 0.90 medial and −0.10 lateral). Approach B had statistically higher lateral muscle forces and lateral optimal muscle fiber lengths but lower medial, central, and lateral normalized muscle fiber lengths compared to Approach A. These findings suggest that poorly calibrated model parameter values may be a major factor limiting the ability of neuromusculoskeletal models to predict knee contact and leg muscle forces accurately for walking.
publisherThe American Society of Mechanical Engineers (ASME)
titleNeuromusculoskeletal Model Calibration Significantly Affects Predicted Knee Contact Forces for Walking
typeJournal Paper
journal volume138
journal issue8
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.4033673
journal fristpage81001
journal lastpage81001
identifier eissn1528-8951
treeJournal of Biomechanical Engineering:;2016:;volume( 138 ):;issue: 008
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record