| contributor author | Ji, Yulong | |
| contributor author | Li, Gen | |
| contributor author | Sun, Yuqing | |
| contributor author | Ma, Hongbin | |
| date accessioned | 2017-05-09T01:19:33Z | |
| date available | 2017-05-09T01:19:33Z | |
| date issued | 2015 | |
| identifier issn | 0022-1481 | |
| identifier other | ht_137_02_020903.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/158425 | |
| description abstract | Wetting characteristics of the vertically aligned carbon nanotube (VACNT) array surface can be modified by atmospheric plasma treatment with masks. The plasma treatment of the VACNT array surface was performed by moving an atmospheric pressure plasma jet system (Plasmatreat GmbH, Steinhagen) at a fixed speed of 0.167 m/s through a mask with holes. The hole diameter is fixed equal to 250 آµm. The distance between holes varies between 0.5 mm to 3.0 mm.The Easy Drop Shape Analyzer (KRUSS GmbH) was used for contact angle measurement. Experimental results show that the wetting characteristics of the VACNT array surface can be modified from a contact angle of 140آ° to 0آ° depending on the distance between holes. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Wettability Control of VACNT Array through Atmospheric Plasma Treatment | |
| type | Journal Paper | |
| journal volume | 137 | |
| journal issue | 2 | |
| journal title | Journal of Heat Transfer | |
| identifier doi | 10.1115/1.4029013 | |
| journal fristpage | 20903 | |
| journal lastpage | 20903 | |
| identifier eissn | 1528-8943 | |
| tree | Journal of Heat Transfer:;2015:;volume( 137 ):;issue: 002 | |
| contenttype | Fulltext | |