| description abstract | Computational fluid dynamics (CFD) analysis, which solves the full threedimensional (3D) Navier–Stokes equations, has been recognized as having promise in providing a more detailed and accurate analysis for oilfilm journal bearings than the traditional Reynolds analysis, although there are still challenging issues requiring further investigation, such as the modeling of cavitation and the modeling of conjugate heat transfer effects in the CFD analysis of bearings. In this paper, a 3D CFD method for the analysis of journal bearings considering the above two effects has been developed; it employs three different cavitation models, including the HalfSommerfeld model, a vaporous cavitation model, and a gaseous cavitation model. The method has been used to analyze a twogroove journal bearing and the results are validated with experimental measurements and the traditional Reynolds solutions. It is found that the CFD method which considers the conjugate heat transfer and employs the gaseous cavitation model gives better predictions of both bearing load and temperature than either the traditional Reynolds solution or CFD with other cavitation models. The CFD results also show strong recirculation of the fresh oil in the grooves, which has been neglected in the traditional Reynolds solution. The above results show conclusively that the present 3D CFD method considering the conjugate heat transfer and employing the gaseous cavitation model provides an efficient tool for more detailed and accurate analysis for bearing performance. | |
