Show simple item record

contributor authorPei, Yuanjiang
contributor authorMehl, Marco
contributor authorLiu, Wei
contributor authorLu, Tianfeng
contributor authorPitz, William J.
contributor authorSom, Sibendu
date accessioned2017-05-09T01:18:19Z
date available2017-05-09T01:18:19Z
date issued2015
identifier issn1528-8919
identifier othergtp_137_11_111502.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/158070
description abstractA mixture of ndodecane and mxylene is investigated as a diesel fuel surrogate for compression ignition (CI) engine applications. Compared to neat ndodecane, this binary mixture is more representative of diesel fuel because it contains an alkylbenzene which represents an important chemical class present in diesel fuels. A detailed multicomponent mechanism for ndodecane and mxylene was developed by combining a previously developed ndodecane mechanism with a recently developed mechanism for xylenes. The xylene mechanism is shown to reproduce experimental ignition data from a rapid compression machine (RCM) and shock tube (ST), speciation data from the jet stirred reactor and flame speed data. This combined mechanism was validated by comparing predictions from the model with experimental data for ignition in STs and for reactivity in a flow reactor. The combined mechanism, consisting of 2885 species and 11,754 reactions, was reduced to a skeletal mechanism consisting 163 species and 887 reactions for 3D diesel engine simulations. The mechanism reduction was performed using directed relation graph (DRG) with expert knowledge (DRGX) and DRGaided sensitivity analysis (DRGASA) at a fixed fuel composition of 77% of ndodecane and 23% mxylene by volume. The sample space for the reduction covered pressure of 1–80 bar, equivalence ratio of 0.5–2.0, and initial temperature of 700–1600 K for ignition. The skeletal mechanism was compared with the detailed mechanism for ignition and flow reactor predictions. Finally, the skeletal mechanism was validated against a spray flame dataset under diesel engine conditions documented on the engine combustion network (ECN) website. These multidimensional simulations were performed using a representative interactive flame (RIF) turbulent combustion model. Encouraging results were obtained compared to the experiments with regard to the predictions of ignition delay and liftoff length at different ambient temperatures.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Multicomponent Blend as a Diesel Fuel Surrogate for Compression Ignition Engine Applications
typeJournal Paper
journal volume137
journal issue11
journal titleJournal of Engineering for Gas Turbines and Power
identifier doi10.1115/1.4030416
journal fristpage111502
journal lastpage111502
identifier eissn0742-4795
treeJournal of Engineering for Gas Turbines and Power:;2015:;volume( 137 ):;issue: 011
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record