Theoretical and Experimental Research on a Pressure Reducing Valve for a Water Hydraulic Vane Pump

Abstract

In order to control the high PV value between the vanes and the cam ring in a water hydraulic vane pump, a pressurereducing valve with a constant pressure ratio was developed in this study. The pressure and leakage characteristics of the valve were theoretically analyzed by simulation and the experiments were also conducted based on the valve prototype. The theoretical analysis agrees well with the experimental results. Further, these results reveal that the pressure ratio of the valve decreases to the design value with the increasing working pressure. Additionally, the leakage of the valve rises simultaneously with the increasing working pressure and can be reduced significantly by decreasing the clearance between the valve body and the spool. The presented research not only proves the successful development of the pressurereducing valve but also lays a foundation for the investigation of a highpressure water hydraulic vane pump.