| contributor author | Griffiths, C. A. | |
| contributor author | Dimov, S. S. | |
| contributor author | Scholz, S. G. | |
| contributor author | Tosello, G. | |
| contributor author | Rees, A. | |
| date accessioned | 2017-05-09T01:10:02Z | |
| date available | 2017-05-09T01:10:02Z | |
| date issued | 2014 | |
| identifier issn | 1087-1357 | |
| identifier other | manu_136_03_031014.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/155483 | |
| description abstract | The paper reports an experimental study that investigates part demoulding behavior in microinjection moulding with a focus on the effects of pressure and temperature on the demoulding forces. In particular, the demoulding performance of a representative microfluidics part was studied as a function of four process parameters, melt temperature, mould temperature, holding pressure, and injection speed, employing the design of experiment approach. In addition, the results obtained using different combinations of process parameters were analyzed to identify the best processing conditions in regards to demoulding behavior of microparts when utilizing a COC polymer to mould them. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Influence of Injection and Cavity Pressure on the Demoulding Force in Micro Injection Moulding | |
| type | Journal Paper | |
| journal volume | 136 | |
| journal issue | 3 | |
| journal title | Journal of Manufacturing Science and Engineering | |
| identifier doi | 10.1115/1.4026983 | |
| journal fristpage | 31014 | |
| journal lastpage | 31014 | |
| identifier eissn | 1528-8935 | |
| tree | Journal of Manufacturing Science and Engineering:;2014:;volume( 136 ):;issue: 003 | |
| contenttype | Fulltext | |