| description abstract | The microscale drilling performance of a Zrbased bulk metallic glass (BMG) is investigated in this paper. Crystallization, drill temperature, axial force, spindle load (SL), acoustic emissions (AE), chip morphology, hole diameter, and entry burr height are measured and analyzed with varying cutting speed and chip load. The progression of tool wear is assessed using stereomicroscopy techniques. At small chip loads, minimum chip thickness (MCT) is observed to shift cutting mechanics from a sheardominated to a ploughingdominated regime. Consequently, evidence of drill instability and larger burr height are observed. As drilling temperatures rise above the glass transition temperature, the BMG thermally softens due to the transition to a supercooled liquid state and begins to exhibit viscous characteristics. In the tool wear study using tungsten carbide microdrills, rake wear is found to dominate compared to flank wear. This is attributed to a combination of a high rate of diffusion wear on the rake face as well as lower abrasion on the flank due to the decreased hardness from thermal softeninginduced viscous flow of BMG. | |
