contributor author | B. H. Wu | |
contributor author | Z. L. Wang | |
contributor author | G. E. O. Widera | |
contributor author | Z. F. Sang | |
date accessioned | 2017-05-09T00:46:34Z | |
date available | 2017-05-09T00:46:34Z | |
date copyright | October, 2011 | |
date issued | 2011 | |
identifier issn | 0094-9930 | |
identifier other | JPVTAS-28550#051205_1.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/147424 | |
description abstract | The objective of this study is to investigate the strength behavior and plastic limit pressure of hot-tapped pipelines under an internal pressure load. Two full scale test models were fabricated for the experiment. A three-dimensional nonlinear finite element analysis was also carried out. The plastic limit pressure was determined approximately by use of the twice the elastic-slope criterion. The results indicate that plastic limit pressures obtained by experiment and finite element analysis are in good agreement. On the basis of the above results, a parametric analysis of the plastic limit pressure was carried out and resulted in the development of formulas useful for the design of hot-tapped pipelines. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | Strength Behavior of Hot-Tapped Pipeline Under Internal Pressure Load | |
type | Journal Paper | |
journal volume | 133 | |
journal issue | 5 | |
journal title | Journal of Pressure Vessel Technology | |
identifier doi | 10.1115/1.4003460 | |
journal fristpage | 51205 | |
identifier eissn | 1528-8978 | |
keywords | Pressure | |
keywords | Stress | |
keywords | Pipelines | |
keywords | Pipes | |
keywords | Bifurcation AND Finite element analysis | |
tree | Journal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 005 | |
contenttype | Fulltext | |