Show simple item record

contributor authorN. K. C. Selvarasu
contributor authorDanesh K. Tafti
contributor authorPavlos P. Vlachos
date accessioned2017-05-09T00:42:36Z
date available2017-05-09T00:42:36Z
date copyrightFebruary, 2011
date issued2011
identifier issn0148-0731
identifier otherJBENDY-27194#021008_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/145487
description abstractCardiovascular diseases are the number one cause of death in the world, making the understanding of hemodynamics and development of treatment options imperative. The most common modality for treatment of occlusive coronary artery diseases is the use of stents. Stent design profoundly influences the postprocedural hemodynamic and solid mechanical environment of the stented artery. However, despite their wide acceptance, the incidence of stent late restenosis is still high (, 2010, “Coronary Stent Thrombosis in the Current Era: Challenges and Opportunities for Treatment,” Current Treatment Options in Cardiovascular Medicine, 12(1), pp. 46–57), and it is most prevailing at the proximal and distal ends of the stent. In this work, we focus our investigation on the localized hemodynamic effects of compliance mismatch due to the presence of a stent in an artery. The compliance mismatch in a stented artery is maximized at the proximal and distal ends of the stent. Hence, it is our objective to understand and reveal the mechanism by which changes in compliance contribute to the generation of nonphysiological wall shear stress (WSS). Such adverse hemodynamic conditions could have an effect on the onset of restenosis. Three-dimensional, spatiotemporally resolved computational fluid dynamics simulations of pulsatile flow with fluid-structure interaction were carried out for a simplified coronary artery with physiologically relevant flow parameters. A model with uniform elastic modulus is used as the baseline control case. In order to study the effect of compliance variation on local hemodynamics, this baseline model is compared with models where the elastic modulus was increased by two-, five-, and tenfold in the middle of the vessel. The simulations provided detailed information regarding the recirculation zone dynamics formed during flow reversals. The results suggest that discontinuities in compliance cause critical changes in local hemodynamics, namely, altering the local pressure and velocity gradients. The change in pressure gradient at the discontinuity was as high as 90%. The corresponding changes in WSS and oscillatory shear index calculated were 9% and 15%, respectively. We demonstrate that these changes are attributed to the physical mechanism associating the pressure gradient discontinuities to the production of vorticity (vorticity flux) due to the presence of the stent. The pressure gradient discontinuities and augmented vorticity flux are affecting the wall shear stresses. As a result, this work reveals how compliance variations act to modify the near wall hemodynamics of stented arteries.
publisherThe American Society of Mechanical Engineers (ASME)
titleHydrodynamic Effects of Compliance Mismatch in Stented Arteries
typeJournal Paper
journal volume133
journal issue2
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.4003319
journal fristpage21008
identifier eissn1528-8951
treeJournal of Biomechanical Engineering:;2011:;volume( 133 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record