High-Fidelity Numerical Analysis of Per-Rev-Type Inlet Distortion Transfer in Multistage Fans—Part II: Entire Component Simulation and Investigation

Abstract

Part I of this paper validated the ability of the unsteady Reynolds-Averaged Navier-Stokes (RANS) solver PTURBO to accurately simulate distortion transfer and generation through selected blade rows of two multistage fans. In this part, unsteady RANS calculations were successfully applied to predict the 1/rev inlet total pressure distortion transfer in the entirety of two differently designed multistage fans. This paper demonstrates that high-fidelity computational fluid dynamics (CFD) can be used early in the design process for verification purposes before hardware is built and can be used to reduce the number of distortion tests, hence reducing engine development cost. The unsteady RANS code PTURBO demonstrated remarkable agreement with the data, accurately capturing both the magnitude and the profile of total pressure and total temperature measurements. Detailed analysis of the flow physics identified from the CFD results has led to a thorough understanding of the total temperature distortion generation and transfer mechanism, especially for the spatial phase difference of total pressure and total temperature profiles. The analysis illustrates that the static parameters are more revealing than their stagnation counterpart and that pressure and temperature rise are more revealing while the pressure and temperature ratio could be misleading. The last stage is effectively throttled by the inlet distortion even though the overall engine throttle remains unchanged. The total temperature distortion generally grows as flow passes through the fan stages.