| contributor author | M. Ahmed | |
| contributor author | H. N. Tran | |
| contributor author | N. Ashgriz | |
| date accessioned | 2017-05-09T00:33:20Z | |
| date available | 2017-05-09T00:33:20Z | |
| date copyright | January, 2009 | |
| date issued | 2009 | |
| identifier issn | 0098-2202 | |
| identifier other | JFEGA4-27354#011306_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/140804 | |
| description abstract | An experimental investigation is conducted to determine the effect of liquid viscosity and density, nozzle diameter, and flow velocity on the break-up length and spreading angle of liquid sheets formed by splash plate nozzles. Various mixtures of corn syrup and water were used to obtain viscosities in the range of 1–170 mPa s. Four different splash plate nozzle diameters of 0.5 mm, 0.75 mm, 1 mm, and 2 mm, with a constant plate angle of 55 deg were tested. The liquid sheet angles and the break-up lengths were measured at various operating conditions. An empirical correlation for the sheet spreading angle and a semi-empirical correlation for the sheet break-up lengths are developed. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Break-Up Length and Spreading Angle of Liquid Sheets Formed by Splash Plate Nozzles | |
| type | Journal Paper | |
| journal volume | 131 | |
| journal issue | 1 | |
| journal title | Journal of Fluids Engineering | |
| identifier doi | 10.1115/1.3026729 | |
| journal fristpage | 11306 | |
| identifier eissn | 1528-901X | |
| keywords | Flow (Dynamics) | |
| keywords | Viscosity AND Nozzles | |
| tree | Journal of Fluids Engineering:;2009:;volume( 131 ):;issue: 001 | |
| contenttype | Fulltext | |