A New Experimental System for the Extended Application of Cyclic Hydrostatic Pressure to Cell CultureSource: Journal of Biomechanical Engineering:;2007:;volume( 129 ):;issue: 001::page 110Author:Timothy M. Maul
,
Douglas W. Hamilton
,
Alejandro Nieponice
,
Lorenzo Soletti
,
David A. Vorp
DOI: 10.1115/1.2401190Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Mechanical forces have been shown to be important stimuli for the determination and maintenance of cellular phenotype and function. Many cells are constantly exposed in vivo to cyclic pressure, shear stress, and/or strain. Therefore, the ability to study the effects of these stimuli in vitro is important for understanding how they contribute to both normal and pathologic states. While there exist commercial as well as custom-built devices for the extended application of cyclic strain and shear stress, very few cyclic pressure systems have been reported to apply stimulation longer than 48h. However, pertinent responses of cells to mechanical stimulation may occur later than this. To address this limitation, we have designed a new cyclic hydrostatic pressure system based upon the following design variables: minimal size, stability of pressure and humidity, maximal accessibility, and versatility. Computational fluid dynamics (CFD) was utilized to predict the pressure and potential shear stress within the chamber during the first half of a 1.0Hz duty cycle. To biologically validate our system, we tested the response of bone marrow progenitor cells (BMPCs) from Sprague Dawley rats to a cyclic pressure stimulation of 120∕80mm Hg, 1.0Hz for 7days. Cellular morphology was measured using Scion Image, and cellular proliferation was measured by counting nuclei in ten fields of view. CFD results showed a constant pressure across the length of the chamber and no shear stress developed at the base of the chamber where the cells are cultured. BMPCs from Sprague Dawley rats demonstrated a significant change in morphology versus controls by reducing their size and adopting a more rounded morphology. Furthermore, these cells increased their proliferation under cyclic hydrostatic pressure. We have demonstrated that our system imparts a single mechanical stimulus of cyclic hydrostatic pressure and is capable of at least 7days of continuous operation without affecting cellular viability. Furthermore, we have shown for the first time that BMPCs respond to cyclic hydrostatic pressure by alterations in morphology and increased proliferation.
keyword(s): Pressure , Hydrostatic pressure , Shear (Mechanics) , Design , Computational fluid dynamics , Stress AND Flow (Dynamics) ,
|
Collections
Show full item record
| contributor author | Timothy M. Maul | |
| contributor author | Douglas W. Hamilton | |
| contributor author | Alejandro Nieponice | |
| contributor author | Lorenzo Soletti | |
| contributor author | David A. Vorp | |
| date accessioned | 2017-05-09T00:22:52Z | |
| date available | 2017-05-09T00:22:52Z | |
| date copyright | February, 2007 | |
| date issued | 2007 | |
| identifier issn | 0148-0731 | |
| identifier other | JBENDY-26664#110_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/135289 | |
| description abstract | Mechanical forces have been shown to be important stimuli for the determination and maintenance of cellular phenotype and function. Many cells are constantly exposed in vivo to cyclic pressure, shear stress, and/or strain. Therefore, the ability to study the effects of these stimuli in vitro is important for understanding how they contribute to both normal and pathologic states. While there exist commercial as well as custom-built devices for the extended application of cyclic strain and shear stress, very few cyclic pressure systems have been reported to apply stimulation longer than 48h. However, pertinent responses of cells to mechanical stimulation may occur later than this. To address this limitation, we have designed a new cyclic hydrostatic pressure system based upon the following design variables: minimal size, stability of pressure and humidity, maximal accessibility, and versatility. Computational fluid dynamics (CFD) was utilized to predict the pressure and potential shear stress within the chamber during the first half of a 1.0Hz duty cycle. To biologically validate our system, we tested the response of bone marrow progenitor cells (BMPCs) from Sprague Dawley rats to a cyclic pressure stimulation of 120∕80mm Hg, 1.0Hz for 7days. Cellular morphology was measured using Scion Image, and cellular proliferation was measured by counting nuclei in ten fields of view. CFD results showed a constant pressure across the length of the chamber and no shear stress developed at the base of the chamber where the cells are cultured. BMPCs from Sprague Dawley rats demonstrated a significant change in morphology versus controls by reducing their size and adopting a more rounded morphology. Furthermore, these cells increased their proliferation under cyclic hydrostatic pressure. We have demonstrated that our system imparts a single mechanical stimulus of cyclic hydrostatic pressure and is capable of at least 7days of continuous operation without affecting cellular viability. Furthermore, we have shown for the first time that BMPCs respond to cyclic hydrostatic pressure by alterations in morphology and increased proliferation. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | A New Experimental System for the Extended Application of Cyclic Hydrostatic Pressure to Cell Culture | |
| type | Journal Paper | |
| journal volume | 129 | |
| journal issue | 1 | |
| journal title | Journal of Biomechanical Engineering | |
| identifier doi | 10.1115/1.2401190 | |
| journal fristpage | 110 | |
| journal lastpage | 116 | |
| identifier eissn | 1528-8951 | |
| keywords | Pressure | |
| keywords | Hydrostatic pressure | |
| keywords | Shear (Mechanics) | |
| keywords | Design | |
| keywords | Computational fluid dynamics | |
| keywords | Stress AND Flow (Dynamics) | |
| tree | Journal of Biomechanical Engineering:;2007:;volume( 129 ):;issue: 001 | |
| contenttype | Fulltext |