Show simple item record

contributor authorS. T. Santillan
contributor authorR. H. Plaut
contributor authorL. N. Virgin
date accessioned2017-05-09T00:18:37Z
date available2017-05-09T00:18:37Z
date copyrightJuly, 2006
date issued2006
identifier issn0021-8936
identifier otherJAMCAV-26600#664_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/133030
description abstractA slender, straight beam resting on a flat, rigid foundation does not buckle when subjected to a compressive load, since the load cannot overcome the effect of the beam’s weight. However, it buckles if its ends are moved toward each other. Post-buckling of such a beam is examined, both theoretically and experimentally, for horizontal and inclined foundations. The beam is modeled as an elastica, and equilibrium states with large deflections are computed, including cases in which self-contact occurs. Frequencies and mode shapes for small vibrations about equilibrium are also determined. Agreement between the theoretical and experimental results is very good.
publisherThe American Society of Mechanical Engineers (ASME)
titlePost-bauckling and Vibration of Heavy Beam on Horizontal or Inclined Rigid Foundation
typeJournal Paper
journal volume73
journal issue4
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.2165237
journal fristpage664
journal lastpage671
identifier eissn1528-9036
keywordsEquilibrium (Physics)
keywordsVibration
keywordsShapes
keywordsStrips AND Weight (Mass)
treeJournal of Applied Mechanics:;2006:;volume( 073 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record