Show simple item record

contributor authorC. T. Liu
contributor authorG. Ravichandran
date accessioned2017-05-09T00:18:33Z
date available2017-05-09T00:18:33Z
date copyrightSeptember, 2006
date issued2006
identifier issn0021-8936
identifier otherJAMCAV-26602#778_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/132997
description abstractIn this study, the effect of confining pressure on the crack growth behavior in a highly filled elastomer was investigated. The material under investigation contains 86% by weight of hard particles embedded in a rubbery matrix. The specimens were tested at a constant strain rate under a confining pressure. Two confining pressures, 3.45MPa and 6.9MPa, and two types of loading, monotonically increasing and cyclic, were considered. The experimental data were analyzed, and the effects of confining pressure on the damage process as well as the constitutive and crack growth behavior in the material are discussed.
publisherThe American Society of Mechanical Engineers (ASME)
titleInfluence of Confining Pressure on the Crack Growth Behavior in a Highly Filled Elastomer
typeJournal Paper
journal volume73
journal issue5
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.2189874
journal fristpage778
journal lastpage782
identifier eissn1528-9036
keywordsPressure
keywordsElastomers
keywordsStress
keywordsFracture (Materials) AND Particulate matter
treeJournal of Applied Mechanics:;2006:;volume( 073 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record