| contributor author | Kenichi Makita | |
| contributor author | Masanori Kagotani | |
| contributor author | Hiroyuki Ueda | |
| contributor author | Lecturer | |
| contributor author | Tomio Koyama | |
| date accessioned | 2017-05-09T00:13:58Z | |
| date available | 2017-05-09T00:13:58Z | |
| date copyright | January, 2004 | |
| date issued | 2004 | |
| identifier issn | 1050-0472 | |
| identifier other | JMDEDB-27774#148_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/130581 | |
| description abstract | Synchronous belt drives are commonly used in conjunction with an idler on the back face of the belt. However, thickness errors between the belt pitch line and back face of the belt, if present, will result in a change in belt tension on the span, and are considered to affect transmission error. In the present study, the transmission error in a synchronous belt drive with an idler under no load was investigated both theoretically and experimentally using a belt of known thickness error. The computed transmission error agrees well with the experimental data thereby verifying the applicability of the analysis method. In addition, a transmission error was mainly generated by the change in length of the belt pitch line due to the thickness error of the belt. It is shown that the transmission error due to the belt thickness error can be removed by using an automatic tensioner. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Transmission Error in Synchronous Belt Drives With Idler (Influence of Thickness Error of Belt Back Face Under No Load Conditions) | |
| type | Journal Paper | |
| journal volume | 126 | |
| journal issue | 1 | |
| journal title | Journal of Mechanical Design | |
| identifier doi | 10.1115/1.1639379 | |
| journal fristpage | 148 | |
| journal lastpage | 155 | |
| identifier eissn | 1528-9001 | |
| keywords | Stress | |
| keywords | Errors | |
| keywords | Thickness | |
| keywords | Belts | |
| keywords | Pulleys | |
| keywords | Tension AND Timing belts | |
| tree | Journal of Mechanical Design:;2004:;volume( 126 ):;issue: 001 | |
| contenttype | Fulltext | |