| description abstract | This paper presents a theoretical thermodynamic analysis of a zero-atmospheric emissions power plant. In this power plant, methane is combusted with oxygen in a gas generator to produce the working fluid for the turbines. The combustion produces a gas mixture composed of steam and carbon dioxide. These gases drive multiple turbines to produce electricity. The turbine discharge gases pass to a condenser where water is captured. A stream of pure carbon dioxide then results that can be used for enhanced oil recovery or for sequestration. The analysis considers a complete power plant layout, including an air separation unit, compressors and intercoolers for oxygen and methane compression, a gas generator, three steam turbines, a reheater, two preheaters, a condenser, and a pumping system to pump the carbon dioxide to the pressure required for sequestration. This analysis is based on a 400 MW electric power generating plant that uses turbines that are currently under development by a U.S. turbine manufacturer. The high-pressure turbine operates at a temperature of 1089 K (1500°F) with uncooled blades, the intermediate-pressure turbine operates at 1478 K (2200°F) with cooled blades and the low-pressure turbine operates at 998 K (1336°F). The power plant has a net thermal efficiency of 46.5%. This efficiency is based on the lower heating value of methane, and includes the energy necessary for air separation and for carbon dioxide separation and sequestration. | |
