| contributor author | S. Kucharski | |
| contributor author | Z. Mróz | |
| date accessioned | 2017-05-09T00:05:01Z | |
| date available | 2017-05-09T00:05:01Z | |
| date copyright | July, 2001 | |
| date issued | 2001 | |
| identifier issn | 0094-4289 | |
| identifier other | JEMTA8-27021#245_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/125293 | |
| description abstract | The identification method of hardening parameters specifying stress-strain curve is proposed by applying spherical indentation test and measuring the penetration depth during loading and unloading. The loading program is composed of a geometric sequence of loading and partial unloading steps from which the variation of permanent penetration with load level is determined. This data is used for specification of two parameters k and m occurring in the plastic hardening curve εp=(σ/k)1/m, where εp denotes the plastic strain. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Identification of Hardening Parameters of Metals From Spherical Indentation Tests | |
| type | Journal Paper | |
| journal volume | 123 | |
| journal issue | 3 | |
| journal title | Journal of Engineering Materials and Technology | |
| identifier doi | 10.1115/1.1375161 | |
| journal fristpage | 245 | |
| journal lastpage | 250 | |
| identifier eissn | 1528-8889 | |
| keywords | Stress | |
| keywords | Hardening | |
| keywords | Stress-strain curves AND Metals | |
| tree | Journal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 003 | |
| contenttype | Fulltext | |