Show simple item record

contributor authorNorman Jones
date accessioned2017-05-09T00:04:52Z
date available2017-05-09T00:04:52Z
date copyrightMarch, 1968
date issued1968
identifier issn0021-8936
identifier otherJAMCAV-25866#59_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/125212
description abstractIt is clear from a survey of literature on the dynamic deformation of rigid-plastic plates that most work has been focused on plates in which either membrane forces or bending moments alone are considered important, while the combined effect of membrane forces and bending moments on the behavior of plates under static loads and beams under dynamic loads is fairly well established. This paper, therefore, is concerned with the behavior of circular plates loaded dynamically and with deflections in the range where both bending moments and membrane forces are important. A general theoretical procedure is developed from the equations for large deflections of plates and a simplified yield condition due to Hodge. The results obtained when solving the governing equations for the particular case of a simply supported circular plate loaded with a uniform impulsive velocity are found to compare favorably with the corresponding experimental values recorded by Florence.
publisherThe American Society of Mechanical Engineers (ASME)
titleImpulsive Loading of a Simply Supported Circular Rigid Plastic Plate
typeJournal Paper
journal volume35
journal issue1
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.3601174
journal fristpage59
journal lastpage65
identifier eissn1528-9036
keywordsForce
keywordsDeformation
keywordsStress
keywordsPlates (structures)
keywordsDeflection
keywordsEquations AND Membranes
treeJournal of Applied Mechanics:;1968:;volume( 035 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record