| contributor author | C. S. Sloan | |
| contributor author | M. D. Cowell | |
| contributor author | T. F. Lehnhoff | |
| date accessioned | 2017-05-09T00:00:39Z | |
| date available | 2017-05-09T00:00:39Z | |
| date copyright | August, 1999 | |
| date issued | 1999 | |
| identifier issn | 0094-9930 | |
| identifier other | JPVTAS-28392#252_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/122716 | |
| description abstract | Stress concentration factors have been determined for large hole to small hole diameter ratios (D/d) of 10 to 50 for two holes in an infinitely wide tension-loaded panel. Finite element analysis was used to model the system of two holes in a plate that approximates the infinitely wide and tall case. Both the D/d ratio and edge to edge hole spacing were examined for hole placement along an axis perpendicular to the direction of the tension field. It was found for large D/d ratios that the stress concentration factor was only dependent on the distance between the hole edges divided by the large hole diameter. For the configurations analyzed, the stress concentration factors varied from approximately 3 to 11. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | The Effect of a Large Hole on the Stress Concentration Factor of a Satellite Hole in a Tension Field | |
| type | Journal Paper | |
| journal volume | 121 | |
| journal issue | 3 | |
| journal title | Journal of Pressure Vessel Technology | |
| identifier doi | 10.1115/1.2883700 | |
| journal fristpage | 252 | |
| journal lastpage | 256 | |
| identifier eissn | 1528-8978 | |
| keywords | Stress concentration | |
| keywords | Tension | |
| keywords | Satellites AND Finite element analysis | |
| tree | Journal of Pressure Vessel Technology:;1999:;volume( 121 ):;issue: 003 | |
| contenttype | Fulltext | |