| contributor author | R. Zhu | |
| contributor author | S. M. Athavale | |
| contributor author | S. G. Kapoor | |
| contributor author | R. E. DeVor | |
| date accessioned | 2017-05-09T00:00:13Z | |
| date available | 2017-05-09T00:00:13Z | |
| date copyright | August, 1999 | |
| date issued | 1999 | |
| identifier issn | 1087-1357 | |
| identifier other | JMSEFK-27346#408_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/122473 | |
| description abstract | A mechanistic modeling approach to predicting machining forces for grooved tools is developed. The models are based solely on the grooved tool geometry and the specific normal cutting energy and friction energy for flat tools. Special grooved tools (M2 grade HSS) were designed and fabricated and orthogonal cutting tests were performed to validate the model. The workpiece material used was Al 6061-T6. The force predictions from the model are found in good agreement with the measured forces. The effects of groove design parameters on the cutting forces are also determined. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Mechanistic Force Models for Chip Control Tools | |
| type | Journal Paper | |
| journal volume | 121 | |
| journal issue | 3 | |
| journal title | Journal of Manufacturing Science and Engineering | |
| identifier doi | 10.1115/1.2832696 | |
| journal fristpage | 408 | |
| journal lastpage | 416 | |
| identifier eissn | 1528-8935 | |
| keywords | Force | |
| keywords | Equipment and tools | |
| keywords | Cutting | |
| keywords | Geometry | |
| keywords | Modeling | |
| keywords | Friction | |
| keywords | Machining AND Design | |
| tree | Journal of Manufacturing Science and Engineering:;1999:;volume( 121 ):;issue: 003 | |
| contenttype | Fulltext | |