Show simple item record

contributor authorMing Jiang
contributor authorNelson O. Wood
contributor authorR. Komanduri
date accessioned2017-05-08T23:56:43Z
date available2017-05-08T23:56:43Z
date copyrightOctober, 1998
date issued1998
identifier issn0094-4289
identifier otherJEMTA8-26994#304_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/120506
description abstractAmong various abrasives investigated for the chemo-mechanical polishing (CMP) of Si3 N4 balls (Jiang, 1998), cerium oxide (CeO2 ) was found to be the most effective polishing medium (even superior to Cr2 03 , Bhagavatula and Komanduri, 1996), yielding an extremely smooth and damage-free surface with a finish Ra of ≈4 nm and Rt of ≈40 nm. In this investigation, the underlying reasons for the superior finish with CeO2 were investigated. Various chemical reactions involved in CMP of Si3 N4 balls with CeO2 were investigated (Gibbs free energy minimization) and a mechanism for the CMP is proposed. The two important functions that CeO2 performs in the CMP of Si3 N4 are: 1. It participates directly in the chemical reaction (oxidization-reduction reaction) with Si3 N4 workmaterial leading to the formation of a thin SiO2 layer, 2. The hardness of CeO2 is closer to that of the thin SiO2 layer formed on Si3 N4 but significantly lower than Si3 N4 workmaterial (≈1/3). It can thus remove the brittle SiO2 reaction product effectively without damaging the Si3 N4 substrate as no abrasion can take place by CeO2 on Si3 N4 . The kinetic action, which involves the removal of the reaction products from the interface by subsequent mechanical action of flowing water and CeO2 is critical to CMP. The chemical reaction could proceed on a continuing basis so long as the passivation layers are removed by the mechanical action at the same time. CeO2 is found to be very effective in a water environment (hydrolysis) leading to the formation of additional SiO2 by reacting with Si3 N4 thereby enhancing the CMP of Si3 N4 . Several similarities between polishing of Si3 N4 and glass (SiO2 ) (Cook, 1990), including the polishing environment (CeO2 plus the magnetic fluid, pH value ≈6) and the mechanism of polishing were observed. Also, after investigating various reaction species in the CMP of Si3 N4 with CeO2 and Cr2 03 , the former is found to be much safer from an environmental point of view (Reddy and Komanduri, 1998).
publisherThe American Society of Mechanical Engineers (ASME)
titleOn the Chemo-Mechanical Polishing (CMP) of Si3N4 Bearing Balls With Water Based CeO2 Slurry
typeJournal Paper
journal volume120
journal issue4
journal titleJournal of Engineering Materials and Technology
identifier doi10.1115/1.2807019
journal fristpage304
journal lastpage312
identifier eissn1528-8889
keywordsPolishing
keywordsSilicon nitride ceramics
keywordsBearings
keywordsSlurries
keywordsWater
keywordsMechanisms
keywordsFinishes
keywordsGibbs' free energy
keywordsAbrasion
keywordsAbrasives
keywordsGlass
keywordsBrittleness
keywordsMagnetic fluids AND Functions
treeJournal of Engineering Materials and Technology:;1998:;volume( 120 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record