YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Fluids Engineering
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Fluids Engineering
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    The Effects of Turbulence and Unsteadiness on Vortex Shedding From Sharp-Edged Bluff Bodies

    Source: Journal of Fluids Engineering:;1996:;volume( 118 ):;issue: 001::page 18
    Author:
    M. C. Wolochuk
    ,
    M. W. Plesniak
    ,
    J. E. Braun
    DOI: 10.1115/1.2817501
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: Motivated by a desire to evaluate vortex shedding flow meters for measuring velocity in unsteady turbulent flow applications, the objective of our work was to study the effects of flow disturbances on vortex shedding from sharp-edged bluff bodies. In particular, the combined effects of turbulence and unsteadiness were examined, as well as their separate effects using controlled wind tunnel tests. After causing an initial and sudden decrease in the Strouhal number, increasing turbulence intensity from 2.5 to 10 percent resulted in only a 2.4 percent increase in the Strouhal number, for turbulence with a length scale of 0.5 bluff body diameters. Turbulence integral length scale had a significant influence on the Strouhal number, with the greatest effect exhibited for length scales near 3 bluff body diameters. Turbulence of this length scale caused a 26 percent decrease in the Strouhal number, as compared to a low-turbulence base case. Fluctuating pressure amplitude and signal-to-noise ratio were also affected by turbulence, and decreased significantly when the integral length Kali was increased from 0.25 to 0.75 bluff body diameters for a turbulence intensity of 10 percent. Unsteadiness caused lock-on for forcing at the Strouhal frequency, twice and four times the Strouhal frequency, while no lock-on was observed for forcing at half the Strouhal frequency. The range of lock-on increased with increasing perturbation amplitude and was asymmetric about the resonant frequency. For the cases investigated, the effects of combined turbulence and unsteadiness were additive, with the turbulence shifting the Strouhal frequency, and the unsteadiness causing lock-on about the shifted Strouhal frequency. The results of this study suggest that vortex shedding flow meters should be calibrated in turbulent flows and turbulence length scale must be controlled at the bluff body. Lock-on can be avoided by sizing the bluff body so that the shedding frequency is always much greater than any disturbance frequency in the flow.
    keyword(s): Turbulence , Vortex shedding , Locks (Waterways) , Flowmeters , Flow (Dynamics) , Pressure , Signal to noise ratio AND Wind tunnels ,
    • Download: (1.068Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Price: 5000 Rial
    • Statistics

      The Effects of Turbulence and Unsteadiness on Vortex Shedding From Sharp-Edged Bluff Bodies

    URI
    http://yetl.yabesh.ir/yetl1/handle/yetl/117209
    Collections
    • Journal of Fluids Engineering

    Show full item record

    contributor authorM. C. Wolochuk
    contributor authorM. W. Plesniak
    contributor authorJ. E. Braun
    date accessioned2017-05-08T23:50:38Z
    date available2017-05-08T23:50:38Z
    date copyrightMarch, 1996
    date issued1996
    identifier issn0098-2202
    identifier otherJFEGA4-27102#18_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/117209
    description abstractMotivated by a desire to evaluate vortex shedding flow meters for measuring velocity in unsteady turbulent flow applications, the objective of our work was to study the effects of flow disturbances on vortex shedding from sharp-edged bluff bodies. In particular, the combined effects of turbulence and unsteadiness were examined, as well as their separate effects using controlled wind tunnel tests. After causing an initial and sudden decrease in the Strouhal number, increasing turbulence intensity from 2.5 to 10 percent resulted in only a 2.4 percent increase in the Strouhal number, for turbulence with a length scale of 0.5 bluff body diameters. Turbulence integral length scale had a significant influence on the Strouhal number, with the greatest effect exhibited for length scales near 3 bluff body diameters. Turbulence of this length scale caused a 26 percent decrease in the Strouhal number, as compared to a low-turbulence base case. Fluctuating pressure amplitude and signal-to-noise ratio were also affected by turbulence, and decreased significantly when the integral length Kali was increased from 0.25 to 0.75 bluff body diameters for a turbulence intensity of 10 percent. Unsteadiness caused lock-on for forcing at the Strouhal frequency, twice and four times the Strouhal frequency, while no lock-on was observed for forcing at half the Strouhal frequency. The range of lock-on increased with increasing perturbation amplitude and was asymmetric about the resonant frequency. For the cases investigated, the effects of combined turbulence and unsteadiness were additive, with the turbulence shifting the Strouhal frequency, and the unsteadiness causing lock-on about the shifted Strouhal frequency. The results of this study suggest that vortex shedding flow meters should be calibrated in turbulent flows and turbulence length scale must be controlled at the bluff body. Lock-on can be avoided by sizing the bluff body so that the shedding frequency is always much greater than any disturbance frequency in the flow.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleThe Effects of Turbulence and Unsteadiness on Vortex Shedding From Sharp-Edged Bluff Bodies
    typeJournal Paper
    journal volume118
    journal issue1
    journal titleJournal of Fluids Engineering
    identifier doi10.1115/1.2817501
    journal fristpage18
    journal lastpage25
    identifier eissn1528-901X
    keywordsTurbulence
    keywordsVortex shedding
    keywordsLocks (Waterways)
    keywordsFlowmeters
    keywordsFlow (Dynamics)
    keywordsPressure
    keywordsSignal to noise ratio AND Wind tunnels
    treeJournal of Fluids Engineering:;1996:;volume( 118 ):;issue: 001
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian