Show simple item record

contributor authorE. Evgin
contributor authorR. M. W. Frederking
contributor authorC. Zhan
date accessioned2017-05-08T23:48:05Z
date available2017-05-08T23:48:05Z
date copyrightMay, 1995
date issued1995
identifier issn0892-7219
identifier otherJMOEEX-28099#145_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/115808
description abstractA method is proposed to calculate pack ice driving forces. In order to develop the method, stress distributions in a circular ice floe are calculated for various boundary loading conditions. The analysis is carried out using a special-purpose finite element program in which Sinha’s creep equation is used to model the behavior of ice. Charts relating pack ice driving forces to stresses in the ice floe are produced for both linear elastic and creep equations for ice behavior. The results indicate that, for a short period of loading time and at low stress levels, a linear elastic analysis can be used to calculate the pack ice driving forces. However, when the stress levels in the ice floe are high or the time span of load application is long, linear and nonlinear analyses produce much different values for pack ice driving forces.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Method to Calculate Pack Ice Driving Forces
typeJournal Paper
journal volume117
journal issue2
journal titleJournal of Offshore Mechanics and Arctic Engineering
identifier doi10.1115/1.2827065
journal fristpage145
journal lastpage150
identifier eissn1528-896X
keywordsForce
keywordsIce
keywordsStress
keywordsIce floes
keywordsEquations
keywordsCreep
keywordsFinite element analysis AND Elastic analysis
treeJournal of Offshore Mechanics and Arctic Engineering:;1995:;volume( 117 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record