Fabric Stratification Manifolds for Solar Water Heating

Abstract

The level of thermal stratification that can be maintained in forced-flow, direct solar water-heating systems using a fabric manifold is studied in a 372-liter tank with an inlet flow rate of 0.07 1/s. A rib-knit, lightweight, spun-orlon acrylic is the most effective manifold material in a comparative study of 13 synthetic and natural fabrics. Thermal stratification (or more appropriately mixing) in the tank equipped with this acrylic manifold is compared to the level of stratification achieved using a rigid, porous manifold and a conventional drop-tube inlet. Initial tank temperature profile, temperature of the water entering the tank, and test duration are varied in three testing schemes. Comparison of vertical temperature profiles and height-weighted energy stored in the tank indicate that under realistic operating conditions, the fabric manifold is 4 percent more effective than the rigid manifold, and 48 percent more effective than the conventional drop-tube inlet.