Show simple item record

contributor authorDai-heng Chen
contributor authorHironobu Nisitani
date accessioned2017-05-08T23:40:26Z
date available2017-05-08T23:40:26Z
date copyrightSeptember, 1993
date issued1993
identifier issn0021-8936
identifier otherJAMCAV-26350#607_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/111376
description abstractIn this paper, the characteristics of the stress field near a corner of jointed dissimilar materials are studied as a plane problem. It is found that the order of singularity is dependent not only on the elastic constants of materials and the local geometry of corner, but also on the deformation mode. The dependence of the order of singularity was established for the case of mode I and the case of mode II. An explicit closed-form expression is given for the singular stress field at the close vicinity of the corner, in which the stress field is expressed as a sum of the symmetric state with a stress singularity of 1/r 1-λ1 and the skew symmetric state with a stress singularity of 1/r 1-λ2 . When both λ1 and λ2 are real the singular stress field around the point singularity is defined in terms of two constants K 1 , λ1 , K 11 , λ2 , as in the case of crack problems.
publisherThe American Society of Mechanical Engineers (ASME)
titleSingular Stress Field Near the Corner of Jointed Dissimilar Materials
typeJournal Paper
journal volume60
journal issue3
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.2900847
journal fristpage607
journal lastpage613
identifier eissn1528-9036
keywordsStress
keywordsCorners (Structural elements)
keywordsStress singularity
keywordsDeformation
keywordsElastic constants
keywordsGeometry AND Fracture (Materials)
treeJournal of Applied Mechanics:;1993:;volume( 060 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record