Fatigue Behavior of Chromium Steel Surface DepositsSource: Journal of Engineering Materials and Technology:;1992:;volume( 114 ):;issue: 002::page 201Author:A. Barbangelo
DOI: 10.1115/1.2904162Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A study of fatigue behavior has been carried out using a set of commercial surfacing chromium steels in the state of deposits postheated at 350°C. The set consisted of various filler metals with different contents of chromium, nickel, carbon, and carbide-forming elements. It has been found that all the deposits examined are characterized by very close values of their fatigue crack growth threshold, ΔKth . In each material, as the stress intensity factor range is varied, three different propagation kinetics are observed, probably triggered by the presence of trapped hydrogen. Fracture toughness and, even though less strictly, subcritical growth by fatigue depended on the vanadium or columbium contents of each material, rather than on the other alloying elements. By adding vanadium or columbium and increasing the columbium content, one obtains a sharp decrease in plane-strain fracture toughness. No interdependence has been found between the values of the fracture toughness and the impact toughness of each material. This apparent discrepancy between the two kinds of toughness can be explained by using a distance criterion for failure at the tips of sharp cracks.
keyword(s): Steel , Fatigue , Fracture toughness , Toughness , Hydrogen , Plane strain , Nickel , Stress , Fracture (Materials) , Carbon , Failure , Fatigue cracks AND Filler metals ,
|
Collections
Show full item record
contributor author | A. Barbangelo | |
date accessioned | 2017-05-08T23:38:35Z | |
date available | 2017-05-08T23:38:35Z | |
date copyright | April, 1992 | |
date issued | 1992 | |
identifier issn | 0094-4289 | |
identifier other | JEMTA8-26950#201_1.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/110341 | |
description abstract | A study of fatigue behavior has been carried out using a set of commercial surfacing chromium steels in the state of deposits postheated at 350°C. The set consisted of various filler metals with different contents of chromium, nickel, carbon, and carbide-forming elements. It has been found that all the deposits examined are characterized by very close values of their fatigue crack growth threshold, ΔKth . In each material, as the stress intensity factor range is varied, three different propagation kinetics are observed, probably triggered by the presence of trapped hydrogen. Fracture toughness and, even though less strictly, subcritical growth by fatigue depended on the vanadium or columbium contents of each material, rather than on the other alloying elements. By adding vanadium or columbium and increasing the columbium content, one obtains a sharp decrease in plane-strain fracture toughness. No interdependence has been found between the values of the fracture toughness and the impact toughness of each material. This apparent discrepancy between the two kinds of toughness can be explained by using a distance criterion for failure at the tips of sharp cracks. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | Fatigue Behavior of Chromium Steel Surface Deposits | |
type | Journal Paper | |
journal volume | 114 | |
journal issue | 2 | |
journal title | Journal of Engineering Materials and Technology | |
identifier doi | 10.1115/1.2904162 | |
journal fristpage | 201 | |
journal lastpage | 207 | |
identifier eissn | 1528-8889 | |
keywords | Steel | |
keywords | Fatigue | |
keywords | Fracture toughness | |
keywords | Toughness | |
keywords | Hydrogen | |
keywords | Plane strain | |
keywords | Nickel | |
keywords | Stress | |
keywords | Fracture (Materials) | |
keywords | Carbon | |
keywords | Failure | |
keywords | Fatigue cracks AND Filler metals | |
tree | Journal of Engineering Materials and Technology:;1992:;volume( 114 ):;issue: 002 | |
contenttype | Fulltext |