| contributor author | S. K. Chen | |
| contributor author | J. Rollbuhler | |
| contributor author | A. H. Lefebvre | |
| date accessioned | 2017-05-08T23:38:30Z | |
| date available | 2017-05-08T23:38:30Z | |
| date copyright | January, 1992 | |
| date issued | 1992 | |
| identifier issn | 1528-8919 | |
| identifier other | JETPEZ-26695#97_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/110277 | |
| description abstract | The spray cone angles produced by several simplex pressure-swirl nozzles are examined using three liquids whose viscosities range from 0.001 to 0.012 kg/ms (1 to 12 cp). Measurements of both the visible spray cone angle and the effective spray cone angle are carried out over wide ranges of injection pressure and for five different values of the discharge orifice length/diameter ratio. The influence of the number of swirl chamber feed slots on spray cone angle is also examined. The results show that the spray cone angle widens with increase in injection pressure but is reduced by increases in liquid viscosity and/or discharge orifice length/diameter ratio. Variation in the number of swirl chamber feed slots between one and three has little effect on the effective spray cone angle. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Factors Influencing the Effective Spray Cone Angle of Pressure-Swirl Atomizers | |
| type | Journal Paper | |
| journal volume | 114 | |
| journal issue | 1 | |
| journal title | Journal of Engineering for Gas Turbines and Power | |
| identifier doi | 10.1115/1.2906313 | |
| journal fristpage | 97 | |
| journal lastpage | 103 | |
| identifier eissn | 0742-4795 | |
| keywords | Pressure | |
| keywords | Sprays | |
| keywords | Viscosity | |
| keywords | Nozzles AND Measurement | |
| tree | Journal of Engineering for Gas Turbines and Power:;1992:;volume( 114 ):;issue: 001 | |
| contenttype | Fulltext | |
