| contributor author | F. L. Litvin | |
| contributor author | R. F. Handschuh | |
| contributor author | J. Zhang | |
| date accessioned | 2017-05-08T23:27:45Z | |
| date available | 2017-05-08T23:27:45Z | |
| date copyright | September, 1988 | |
| date issued | 1988 | |
| identifier issn | 1050-0472 | |
| identifier other | JMDEDB-28091#343_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/104202 | |
| description abstract | A method for generation of crowned pinion tooth surfaces using a surface of revolution is developed. The crowned pinion meshes with a regular involute gear and has a prescribed parabolic type of transmission errors when the gears operate in the aligned mode. When the gears are misaligned the transmission error remains parabolic with the maximum level still remaining very small (less than 0.34 arc second for the numerical examples). Tooth Contact Analysis (TCA) is used to simulate the conditions of meshing, determine the transmission error, and the bearing contact. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Crowned Spur Gears: Methods for Generation and Tooth Contact Analysis—Part 2: Generation of the Pinion Tooth Surface by a Surface of Revolution | |
| type | Journal Paper | |
| journal volume | 110 | |
| journal issue | 3 | |
| journal title | Journal of Mechanical Design | |
| identifier doi | 10.1115/1.3267468 | |
| journal fristpage | 343 | |
| journal lastpage | 347 | |
| identifier eissn | 1528-9001 | |
| keywords | Gears | |
| keywords | Spur gears | |
| keywords | Errors AND Bearings | |
| tree | Journal of Mechanical Design:;1988:;volume( 110 ):;issue: 003 | |
| contenttype | Fulltext | |