| contributor author | F. Ito | |
| contributor author | K. Kuwabara | |
| contributor author | M. Miyazaki | |
| contributor author | Y. Fukui | |
| contributor author | Y. Takeda | |
| date accessioned | 2017-05-08T23:27:12Z | |
| date available | 2017-05-08T23:27:12Z | |
| date copyright | January, 1988 | |
| date issued | 1988 | |
| identifier issn | 1528-8919 | |
| identifier other | JETPEZ-26651#127_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/103928 | |
| description abstract | For future advanced steam turbines of 4500 psi and 1100°F, a high-temperature rotor is one of the most important components to be developed. We estimated that the usable temperature limit of existing 12Cr steel was approximately 1075°F, and then developed improved 12Cr steels. Prototype rotors were made from three types of developed steels, and were put to various evaluation tests. All three steels had creep-rupture strength exceeding that of existing 12Cr steels and were satisfactory in quality and in the other mechanical properties. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Improved 12 Percent Cr Rotor Forgings for Advanced Steam Turbines | |
| type | Journal Paper | |
| journal volume | 110 | |
| journal issue | 1 | |
| journal title | Journal of Engineering for Gas Turbines and Power | |
| identifier doi | 10.1115/1.3240075 | |
| journal fristpage | 127 | |
| journal lastpage | 131 | |
| identifier eissn | 0742-4795 | |
| keywords | Forgings (Products) | |
| keywords | Rotors | |
| keywords | Steam turbines | |
| keywords | Steel | |
| keywords | High temperature | |
| keywords | Rupture | |
| keywords | Engineering prototypes | |
| keywords | Mechanical properties | |
| keywords | Creep AND Temperature | |
| tree | Journal of Engineering for Gas Turbines and Power:;1988:;volume( 110 ):;issue: 001 | |
| contenttype | Fulltext | |
