Show simple item record

contributor authorA. J. Durelli
contributor authorY. H. Lin
date accessioned2017-05-08T23:21:52Z
date available2017-05-08T23:21:52Z
date copyrightMarch, 1986
date issued1986
identifier issn0021-8936
identifier otherJAMCAV-26265#213_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/100820
description abstractThe paper deals with stresses and displacements in circular rings of rectangular cross-section, loaded in the plane and perpendicular to the boundary. Values are given for all points at the inside and outside boundaries, are presented parametrically for rings for which the ratio of diameters ID/OD varies from 0 to very close to 1, and have been obtained from several sources, mainly Nelson’s equations. References to some previous contributions are included. The information presented in the paper was not available in a complete manner and will be useful in numerous structural applications. The analysis corresponding to loads applied tangentially to the boundary could be approached in a similar manner.
publisherThe American Society of Mechanical Engineers (ASME)
titleStresses and Displacements on the Boundaries of Circular Rings Diametrically Loaded
typeJournal Paper
journal volume53
journal issue1
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.3171715
journal fristpage213
journal lastpage219
identifier eissn1528-9036
keywordsStress AND Equations
treeJournal of Applied Mechanics:;1986:;volume( 053 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record