| contributor author | Tae Hyong Chong | |
| contributor author | A. Kubo | |
| date accessioned | 2017-05-08T23:20:49Z | |
| date available | 2017-05-08T23:20:49Z | |
| date copyright | September, 1985 | |
| date issued | 1985 | |
| identifier issn | 1050-0472 | |
| identifier other | JMDEDB-28055#406_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/100183 | |
| description abstract | Using the finite element method, influences of chordal tooth thickness at the critical section of tooth, radius of curvature of fillet, rim thickness, and supporting condition of a thin-rimmed spur gear on the tooth fillet and root stresses are investigated. Summing up a lot of FEM calculated results, a set of approximate formulae is derived for the calculation of tooth fillet and root stresses of a thin-rimmed spur gear. A comparison between the FEM calculated stress values and the values from these approximation formulae has shown good agreement. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Simple Stress Formulae for a Thin-Rimmed Spur Gear. Part 1: Derivation of Approximation Formulae for Tooth Fillet and Root Stresses | |
| type | Journal Paper | |
| journal volume | 107 | |
| journal issue | 3 | |
| journal title | Journal of Mechanical Design | |
| identifier doi | 10.1115/1.3260733 | |
| journal fristpage | 406 | |
| journal lastpage | 411 | |
| identifier eissn | 1528-9001 | |
| keywords | Stress | |
| keywords | Gears | |
| keywords | Approximation | |
| keywords | Formulas | |
| keywords | Spur gears | |
| keywords | Thickness AND Finite element model | |
| tree | Journal of Mechanical Design:;1985:;volume( 107 ):;issue: 003 | |
| contenttype | Fulltext | |