Search
CSV
RISAssessment of Multiobjective Genetic Algorithms With Different Niching Strategies and Regression Methods for Engine Optimization and Design
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In a previous study (, and , 2008, “Assessment of Optimization Methodologies to Study the Effects of Bowl Geometry, Spray Targeting and Swirl Ratio for a Heavy-Duty Diesel Engine Operated at ...
Power-to-Gas Energy Storage by Reversible Solid Oxide Cell for Distributed Renewable Power Systems
Publisher: American Society of Civil Engineers
Abstract: The conflict between energy utilization and environmental problems is deepening, urging society to promote the utilization of renewable energy in the future energy structure. In this paper, the processes of power-to-gas ...
Experimental and Analytical Study of Flexural Buckling of Cold-Formed Steel Quadruple-Limb Built-Up Box Columns
Publisher: ASCE
Abstract: To better understand the mechanical behavior of cold-formed steel (CFS) quadruple-limb built-up box-section (QBB) columns associated with flexural buckling, 12 axial compression tests with different slenderness ratios and ...
Resistance Capacity of a Hybrid Titanium–Clad Bimetallic Steel Plate Girder under Patch Loading
Publisher: ASCE
Abstract: The corrosion of structural steel has a significant impact on the durability of plate girders servicing in marine environments. A high-performance configuration for a steel plate girder with a titanium–clad bimetallic steel ...
Study on In-Plane and Out-of-Plane Stiffness of Cold-Formed Steel Composite Floor with Opening
Publisher: ASCE
Abstract: In this study, experimental investigations were conducted to study the hysteresis and flexural performances of cold-formed steel (CFS) composite floors. The failure modes of the hysteresis specimens were damage of the ...
Compressive Behavior of Gusset Plates Connected with Single-Angle Members
Publisher: American Society of Civil Engineers
Abstract: Gusset plate connections with single-angle steel members are commonly used in power transmission towers. However, little research has been carried out with regard to the compressive behavior and design of gusset plates ...
Compressive Behavior of Gusset Plates Connected with Single-Angle Members
Publisher: American Society of Civil Engineers
Abstract: Gusset plate connections with single-angle steel members are commonly used in power transmission towers. However, little research has been carried out with regard to the compressive behavior and design of gusset plates ...
Hybrid Self-Centering Connection Employing Energy Dissipation Sequences: Experimental Study and a Structural Seismic Demand Perspective
Publisher: ASCE
Abstract: This study reported an experimental study of hybrid-self-centering connections (HSCCs) employing energy dissipation sequences. The dual self-centering mechanism of the connection consisting of post-tensioned (PT) steel ...
Nonuniform Clearance Effects on Windage Heating and Swirl Development in Straight-Through Labyrinth Seals
Publisher: ASCE
Abstract: Straight-through labyrinth seals are reliable noncontact seal structures widely used in aeroengines. Windage heating and swirl development of labyrinth seals are of great significance to the design of secondary air systems. ...