Search
Now showing items 1-10 of 11
Stabilization of Low-NOx Hydrogen Flames on a Dual-Swirl Coaxial Injector
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Hydrogen-fueled carbon-free energy is a growing prospect for the future of several industries, including the aeronautical and energy generation sectors. However, the transition to hydrogen comes with several challenges: ...
High Amplitude Combustion Instabilities in an Annular Combustor Inducing Pressure Field Deformation and Flame Blow Off
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This article reports experiments carried out in the laboratory scale annular combustor MICCA-spray equipped with multiple swirling spray injectors. The experimental setup consists in an air plenum connected to a combustion ...
Intermittency of Flame Structure and Thermo-Acoustic Behavior in a Staged Multipoint Injector Using Liquid Fuel
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study investigates the impact of the staging factor, the ratio between the fuel injected through the pilot stage and the multipoint injection, on the flame dynamic. The BIMER combustor is an atmospheric pressure rig ...
Analysis of Thermo-Acoustic Instabilities Induced by Hydrogen Swirling Flames
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A considerable research effort has been concerned combustion dynamics of systems fed with hydrocarbon fuels. The case of pure hydrogen/air flames deserves to be specifically considered because hydrogen is highly reactive, ...
Experimental Study of Thermo-Acoustic Instability Triggering in a Staged Liquid Fuel Combustor Using High-Speed OH-PLIF
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A staged injector developed by JAXA and fueled with kerosene is studied in a high-pressure combustion experiment. With a stable pilot fuel flow rate, the fuel flow rate in the main stage is progressively increased. A ...
Azimuthal Instabilities of an Annular Combustor With Different Swirling Injectors
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experiments are carried out on the laboratoryscale MICCASpray annular combustor to examine the effects of swirlers on combustion instabilities. This system comprises 16 sprayswirl injectors and gives rise to instabilities ...
Effect of Different Fuels on Combustion Instabilities in an Annular Combustor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Combustion instability in annular combustors of jet engines is a recurring issue. In this study, the characteristics of instabilities for different fuels are investigated by combining the instability maps obtained in a ...
Assessing Transfer Matrix Models and Measurements Using Acoustic Energy Conservation Principles
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Acoustic transfer matrices are widely used in the analysis of combustion dynamics of gas turbines. The reliability of the analysis thus depends on the quality of the determination of the transfer matrices of the individual ...
Structure and NOx Emissions of Stratified Hydrogen-Air Flames Stabilized on a Coaxial Injector
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In recent years, the need for low-carbon power has seen hydrogen emerge as a potential fuel to replace conventional hydrocarbons in combustion to limit CO2 emissions in several sectors, including aeronautics. The challenges ...
A Joint Experimental and Large Eddy Simulation Characterization of the Liquid Fuel Spray in a Swirl Injector
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The quality of liquid fuel spray injection determines to a large extent the performance of aero-engine combustors. This investigation focuses on the detailed characterization of the liquid fuel spray in a test rig targeted ...