Search
Now showing items 1-10 of 10
Nanomodified Cementitious Composites Incorporating Basalt Fiber Pellets under Tensile and Impact Loads
Publisher: ASCE
Abstract: This study investigated the behavior of nanomodified cementitious composites reinforced with innovative basalt fiber pellets (BFP), with specially tailored surface texture under quasi-static (direct) tensile as well as ...
Bonding Evaluation of Nanosilica-Modified Slag-Based Composites Comprising of Basalt Pellets and Polyvinyl Alcohol Fibers for Shear Joints
Publisher: ASCE
Abstract: The interfacial bonding between precast conventional concrete (CC) segments and cast-in place high-performance fiber-reinforced cementitious composites (HPFRCC) has received significant attention for jointing applications ...
Effect of Curing Methods on Quality of Concrete Joints: Experimental and Modeling
Publisher: American Society of Civil Engineers
Abstract: Joint deterioration in concrete pavements is predominantly related to penetrability of concrete and environmental conditions. Saw-cutting as the last procedure in the construction sequence of concrete pavements may compromise ...
Effect of Nano-Based Coatings on Concrete under Aggravated Exposures
Publisher: ASCE
Abstract: In this study, a nano-silica (5% to 50%) water-based solution and silane/nano-clay (5% to 50%) composite were used as superficial treatments for concrete. The coatings were applied on concretes with different water-to-binder ...
Performance of Concrete with Alkali-Activated Materials and Nanosilica in Acidic Environments
Publisher: American Society of Civil Engineers
Abstract: Owing to their high chemical resistance, alkali-activated materials (AAMs) may represent a promising option for repairing concrete structures affected by acidic media. However, AAMs have some technical limitations with ...
Improving the Properties of Soft Clay Using Cement, Slag, and Nanosilica: Experimental and Statistical Modeling
Publisher: ASCE
Abstract: Efficient utilization of problematic soils such as soft clay by imparting additional strength using various stabilization techniques is done to improve soil properties. The application of nanomaterials in the area of soil ...
Concrete Incorporating Nanosilica Cured under Freezing Temperatures Using Conventional and Hybrid Protection Methods
Publisher: ASCE
Abstract: Ultrafine nanosilica particles have the potential to produce concrete under low temperatures. In this study, nanomodified concrete was cured under freezing temperatures (−10°C and −20°C) using insulation blankets without ...
Flexural Performance of Nanomodified Cementitious Composites Reinforced with BFP in Bonded Overlays
Publisher: ASCE
Abstract: There is strong demand for ductile cement-based materials in various rehabilitation systems of concrete infrastructure. This study investigated the flexural performance of nanomodified cementitious composites incorporating ...
Effect of Reinforcement Ratio on Transverse Early-Age Cracking of GFRP-RC Bridge Deck Slabs
Publisher: American Society of Civil Engineers
Abstract: Because concrete bridge deck slabs are much longer in the traffic direction, they experience transverse early-age cracks due to volumetric instability and restraint. In the last decade, the use of the noncorrodible ...
Residual Mechanical Properties of BPRCC under Cyclic Environmental Conditions
Publisher: ASCE
Abstract: In this study, the performance of basalt pellet–reinforced cementitious composites (BPRCC) was evaluated after exposure to harsh conditions. The exposure consisted of consecutive 300 freeze–thaw cycles followed by 75 wet–dry ...
CSV
RIS