Search
CSV
RISSimultaneous Boiling Visualization and Heat Transfer Measurement of Two Adjacent Water Impinging Jets
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The effect of jettojet distance of two adjacent jets on boiling heat transfer was investigated by a simultaneous boiling visualization and heat transfer measurement. The hydrodynamics of two adjacent jets were visualized ...
Visual Observation of Circular Water Jet Impingement Boiling on Stationary Hot Steel Plate
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The timeand spaceresolved water jet impingement heat transfer on stationary hot steel plate was measured by a novel experimental technique that has a function of hightemperature heat flux gauge. The simultaneous visual ...
Boiling Visualization of Two Adjacent Impinging Jets on Hot Steel Plate
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The simultaneous measurement between the boiling visualization and the boiling heat transfer characteristics by two adjacent impinging jets on hot steel plate was made by the experimental technique that has a function of ...
Visualization of Terrain induced Slugging in W shaped Pipeline
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Gasliquid twophase flow in a circular pipeline is commonly encountered in an inclined pipeline of an offshore plant. To visualize gasliquid flow phenomena in an inclined pipeline, the wshaped transparent pipeline was ...
Visual Onset of Nucleate Boiling in Water Spray Cooling on Hot Steel Plate
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The onset of nucleate boiling in water spray cooling on hot steel plate was investigated by a simultaneous boiling visualization and heat transfer measurement. The boiling phenomena were visualized with 4K video camera and ...
Flow Boiling Heat Transfer of Subcooled Water on Sintered Microporous Surfaces
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Electronic devices such as battery packs in electric vehicles and LED lights require advanced control in temperature uniformity for their optimum performance and prolonged lifetime. Flow boiling heat transfer of subcooled ...
Evolution of Differential Pressure Inside a Venturi Tube With Traveling Air Slug
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Photogallery Entry 5
Visual Criteria for Measuring Two phase Flow Rate in Venturi with Flow Homogenizer
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A simple use of Venturi might be used to measure twophase flow rate within relatively low GVF(gas volume fraction). Upstream flow entering Venturi can be improved with installed flow homogenizer which is easily fabricated ...
Flow Visualization inside Thermosyphon for Measuring Heat Transfer Limit
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Heat pipe is a highly effective passive heat transfer device using phase change within small temperature difference. It is noted that heat pipe should be operated under heat transfer limit for practical heat pipe heat ...
Nucleate Boiling Comparison between Teflon-Coated Plain Copper and Cu-HTCMC in Water
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The hydrophobic, Teflon-coated surfaces on plain copper and Cu-HTCMC (High temperature Thermally Conductive Microporous Coating) compared on pool boiling heat transfer of water. The HTCMC was created by sintering of copper ...