Search
Now showing items 1-10 of 10
Effect of Surface Roughness on Cavitation Performance of Hydrofoils—Report 3
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: As a sequel to the first and second reports of the present series of experiments intended to gain knowledge on the effect of surface roughness on hydromechanical characteristics, particularly ...
Cavitation Tests on Hydrofoils Designed for Accelerating Flow Cascade: Report 3—Five Profiles Generated From Prescribed Pressure Configurations of Types 1 and 3
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: It has been demonstrated that profiles can be found which manifest extremely favorable characteristics when used as blade elements of a given cascade formation. The method of developing such ...
Cavitation Tests on Hydrofoils Designed for Accelerating Flow Cascade: Report 1
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In previous reports, theory [1, 2] and experiments [3–7] were discussed on profiles that promised to possess desirable characteristics when incorporated into cascades of given arrangement. These ...
Discussion: “Investigation of Cavitating Cascades” (Wade, R. B., and Acosta, A. J., 1967, ASME J. Basic Eng., 89, pp. 693–702)
Publisher: The American Society of Mechanical Engineers (ASME)
Effect of Turbulence in Free Stream on Cavitation Incipience of Hydrofoil
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: It was proved experimentally that the conditions of cavitation incipience, such as the positions of incipient cavitation bubble formation and collapse, extent of cavitation, and the propensity ...
An Experimental Study of Accelerated Cavitation Induced by Ultrasonics
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: With a view to clarifying cavitation phenomena induced by ultrasonic waves, utilized recently in erosion tests, the frequency spectrum of the waves caused by cavitation was obtained, and the ...
Cavitation Tests on Hydrofoils Designed for Accelerating Flow Cascade; Report 4—Three Profiles Designed for High Head Kaplan Turbine
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In pursuit of the studies previously reported [1–3], three profiles suited for application in the main blade elements of high head Kaplan turbines—two intended for sections near boss and one ...
Effect of Cavitation on the Accuracy of Herschel-Type Venturi Tubes
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experiments were undertaken to determine the effect of cavitation on the discharge coefficient of venturi tubes of Herschel type, and on additional limitations that must be applied to existing ...
Cavitation Effect on the Discharge Coefficient of the Sharp-Edged Orifice Plate
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The object of this paper is to investigate the effects of cavitation on the discharge coefficient of sharp-edged orifice plates with reference to various degrees of cavitation as defined by a ...
Effect of Surface Roughness on Cavitation Performance of Hydrofoils—Report 1
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The effect of surface roughness on hydrofoil characteristics, particularly cavitation performance, was studied experimentally. It was intended to initiate the first of a series of studies to ...