| contributor author | B. W. Chavel | |
| contributor author | C. J. Earls | |
| date accessioned | 2017-05-08T21:25:27Z | |
| date available | 2017-05-08T21:25:27Z | |
| date copyright | January 2006 | |
| date issued | 2006 | |
| identifier other | %28asce%291084-0702%282006%2911%3A1%2881%29.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/50898 | |
| description abstract | In the case of horizontally curved steel I-girder bridges, girder and cross-frame members are frequently detailed for erection in the no-load condition as a matter of convention. As a result, it is imperative that the erection sequence used to construct such bridges be comprehensively studied to ensure that the no-load condition can be achieved in the field and that significant superstructure component fit-up problems do not occur. The current research investigates the erection of a recently constructed horizontally curved steel I-girder bridge, in which significant difficulties were encountered during erection. The bridge erection is recreated through an analytical simulation using a detailed nonlinear finite element model. The analytical results demonstrate that a condition that closely resembles the no-load condition can be achieved in the field during construction with the proper implementation of temporary support structures; and that the difficulties encountered during the erection of the subject bridge superstructure could not be attributed to the erection scheme followed. | |
| publisher | American Society of Civil Engineers | |
| title | Construction of a Horizontally Curved Steel I-Girder Bridge. Part I: Erection Sequence | |
| type | Journal Paper | |
| journal volume | 11 | |
| journal issue | 1 | |
| journal title | Journal of Bridge Engineering | |
| identifier doi | 10.1061/(ASCE)1084-0702(2006)11:1(81) | |
| tree | Journal of Bridge Engineering:;2006:;Volume ( 011 ):;issue: 001 | |
| contenttype | Fulltext | |