| contributor author | Thomas Jared Weaver | |
| contributor author | David W. Jensen | |
| date accessioned | 2017-05-08T21:16:01Z | |
| date available | 2017-05-08T21:16:01Z | |
| date copyright | January 2000 | |
| date issued | 2000 | |
| identifier other | %28asce%290893-1321%282000%2913%3A1%2823%29.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/44915 | |
| description abstract | Graphite/epoxy IsoTruss specimens were filament wound and experimentally tested to failure under simple compression, tension, and torsion and compared with simple analytical predictions. Failed specimens were subsequently retested to gain further insight into the mechanical interaction of the various components of the IsoTruss. Simple analytical techniques were used to predict the approximate strength of the IsoTruss. A total of 15 five inch (12.7 cm) diameter, five-bay IsoTruss specimens were filament wound on a reusable, silicone inner mandrel. Nine 3-tow specimens with a nominal member cross-sectional area of 0.27 in. | |
| publisher | American Society of Civil Engineers | |
| title | Mechanical Characterization of a Graphite/Epoxy IsoTruss | |
| type | Journal Paper | |
| journal volume | 13 | |
| journal issue | 1 | |
| journal title | Journal of Aerospace Engineering | |
| identifier doi | 10.1061/(ASCE)0893-1321(2000)13:1(23) | |
| tree | Journal of Aerospace Engineering:;2000:;Volume ( 013 ):;issue: 001 | |
| contenttype | Fulltext | |