Show simple item record

contributor authorThomas Jared Weaver
contributor authorDavid W. Jensen
date accessioned2017-05-08T21:16:01Z
date available2017-05-08T21:16:01Z
date copyrightJanuary 2000
date issued2000
identifier other%28asce%290893-1321%282000%2913%3A1%2823%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/44915
description abstractGraphite/epoxy IsoTruss specimens were filament wound and experimentally tested to failure under simple compression, tension, and torsion and compared with simple analytical predictions. Failed specimens were subsequently retested to gain further insight into the mechanical interaction of the various components of the IsoTruss. Simple analytical techniques were used to predict the approximate strength of the IsoTruss. A total of 15 five inch (12.7 cm) diameter, five-bay IsoTruss specimens were filament wound on a reusable, silicone inner mandrel. Nine 3-tow specimens with a nominal member cross-sectional area of 0.27 in.
publisherAmerican Society of Civil Engineers
titleMechanical Characterization of a Graphite/Epoxy IsoTruss
typeJournal Paper
journal volume13
journal issue1
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)0893-1321(2000)13:1(23)
treeJournal of Aerospace Engineering:;2000:;Volume ( 013 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record