Multiple Model L1 Adaptive Fault-Tolerant Control of Small Unmanned Aerial VehiclesSource: Journal of Aerospace Engineering:;2024:;Volume ( 037 ):;issue: 001::page 04023103-1Author:Toufik Souanef
DOI: 10.1061/JAEEEZ.ASENG-4427Publisher: ASCE
Abstract: This paper presents a method for fault-tolerant control of small fixed-wing unmanned aerial vehicles (UAVs). The proposed design is based on multiple-model L1 adaptive control. The controller is composed of a nominal reference model and a set of suboptimal reference models. The nominal model is the one with desired dynamics that are optimal regarding specific criteria. In a suboptimal model, the performance criteria are reduced; it is also designed to ensure system robustness in the presence of critical failures. The controller was tested in simulations, which revealed that the multiple model L1 adaptive controller stabilizes the system in the case of inversion of the control input, while the L1 adaptive controller with a single nominal model fails. Small drones or UAVs, with wingspans less than 2 m and payloads smaller than 2 kg, are generally built based on commercial radio-controlled (RC) airplanes. Small UAVs are gaining growing interest because of their low cost, high maneuverability, and simple maintenance. Autonomy, although relative because UAVs are still operated under human supervision, is the main feature of small UAVs compared with RC airplanes. Autonomy has been made possible through the development of advanced autopilot (flight control) systems. They are used for a wide range of military and civilian tasks, such as inspection, detection, transportation, monitoring, search and rescue, photography, imaging, mapping, intelligence, surveillance, reconnaissance, agriculture, entertainment, etc. However, small UAVs are generally built with low-cost components and materials, which increases the probability of occurrence of faults and failures. The proposed flight control solution permits one to maintain the UAVs in flight in the presence of hard failure, while other approaches fail. Therefore, the mission can be safely terminated, either automatically or manually. Alternatively, it can also be decided to complete the operation in degraded (limited) mode. Therefore, this solution is recommended for the operation of drones, especially in urban environments that require a high degree of safety and reliability.
|
Collections
Show full item record
| contributor author | Toufik Souanef | |
| date accessioned | 2024-04-27T22:38:45Z | |
| date available | 2024-04-27T22:38:45Z | |
| date issued | 2024/01/01 | |
| identifier other | 10.1061-JAEEEZ.ASENG-4427.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4297155 | |
| description abstract | This paper presents a method for fault-tolerant control of small fixed-wing unmanned aerial vehicles (UAVs). The proposed design is based on multiple-model L1 adaptive control. The controller is composed of a nominal reference model and a set of suboptimal reference models. The nominal model is the one with desired dynamics that are optimal regarding specific criteria. In a suboptimal model, the performance criteria are reduced; it is also designed to ensure system robustness in the presence of critical failures. The controller was tested in simulations, which revealed that the multiple model L1 adaptive controller stabilizes the system in the case of inversion of the control input, while the L1 adaptive controller with a single nominal model fails. Small drones or UAVs, with wingspans less than 2 m and payloads smaller than 2 kg, are generally built based on commercial radio-controlled (RC) airplanes. Small UAVs are gaining growing interest because of their low cost, high maneuverability, and simple maintenance. Autonomy, although relative because UAVs are still operated under human supervision, is the main feature of small UAVs compared with RC airplanes. Autonomy has been made possible through the development of advanced autopilot (flight control) systems. They are used for a wide range of military and civilian tasks, such as inspection, detection, transportation, monitoring, search and rescue, photography, imaging, mapping, intelligence, surveillance, reconnaissance, agriculture, entertainment, etc. However, small UAVs are generally built with low-cost components and materials, which increases the probability of occurrence of faults and failures. The proposed flight control solution permits one to maintain the UAVs in flight in the presence of hard failure, while other approaches fail. Therefore, the mission can be safely terminated, either automatically or manually. Alternatively, it can also be decided to complete the operation in degraded (limited) mode. Therefore, this solution is recommended for the operation of drones, especially in urban environments that require a high degree of safety and reliability. | |
| publisher | ASCE | |
| title | Multiple Model L1 Adaptive Fault-Tolerant Control of Small Unmanned Aerial Vehicles | |
| type | Journal Article | |
| journal volume | 37 | |
| journal issue | 1 | |
| journal title | Journal of Aerospace Engineering | |
| identifier doi | 10.1061/JAEEEZ.ASENG-4427 | |
| journal fristpage | 04023103-1 | |
| journal lastpage | 04023103-10 | |
| page | 10 | |
| tree | Journal of Aerospace Engineering:;2024:;Volume ( 037 ):;issue: 001 | |
| contenttype | Fulltext |