Show simple item record

contributor authorToufik Souanef
date accessioned2024-04-27T22:38:45Z
date available2024-04-27T22:38:45Z
date issued2024/01/01
identifier other10.1061-JAEEEZ.ASENG-4427.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4297155
description abstractThis paper presents a method for fault-tolerant control of small fixed-wing unmanned aerial vehicles (UAVs). The proposed design is based on multiple-model L1 adaptive control. The controller is composed of a nominal reference model and a set of suboptimal reference models. The nominal model is the one with desired dynamics that are optimal regarding specific criteria. In a suboptimal model, the performance criteria are reduced; it is also designed to ensure system robustness in the presence of critical failures. The controller was tested in simulations, which revealed that the multiple model L1 adaptive controller stabilizes the system in the case of inversion of the control input, while the L1 adaptive controller with a single nominal model fails. Small drones or UAVs, with wingspans less than 2 m and payloads smaller than 2 kg, are generally built based on commercial radio-controlled (RC) airplanes. Small UAVs are gaining growing interest because of their low cost, high maneuverability, and simple maintenance. Autonomy, although relative because UAVs are still operated under human supervision, is the main feature of small UAVs compared with RC airplanes. Autonomy has been made possible through the development of advanced autopilot (flight control) systems. They are used for a wide range of military and civilian tasks, such as inspection, detection, transportation, monitoring, search and rescue, photography, imaging, mapping, intelligence, surveillance, reconnaissance, agriculture, entertainment, etc. However, small UAVs are generally built with low-cost components and materials, which increases the probability of occurrence of faults and failures. The proposed flight control solution permits one to maintain the UAVs in flight in the presence of hard failure, while other approaches fail. Therefore, the mission can be safely terminated, either automatically or manually. Alternatively, it can also be decided to complete the operation in degraded (limited) mode. Therefore, this solution is recommended for the operation of drones, especially in urban environments that require a high degree of safety and reliability.
publisherASCE
titleMultiple Model L1 Adaptive Fault-Tolerant Control of Small Unmanned Aerial Vehicles
typeJournal Article
journal volume37
journal issue1
journal titleJournal of Aerospace Engineering
identifier doi10.1061/JAEEEZ.ASENG-4427
journal fristpage04023103-1
journal lastpage04023103-10
page10
treeJournal of Aerospace Engineering:;2024:;Volume ( 037 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record