YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASCE
    • Journal of Aerospace Engineering
    • View Item
    •   YE&T Library
    • ASCE
    • Journal of Aerospace Engineering
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Impact Behaviors of Sandwich Composites Produced by Liquid Resin Infusion: Influences of the Process Parameters

    Source: Journal of Aerospace Engineering:;2022:;Volume ( 035 ):;issue: 005::page 04022076
    Author:
    Jean Gulla
    ,
    Arthur Cantarel
    ,
    Marie-Laetitia Pastor
    ,
    Xiaojing Gong
    DOI: 10.1061/(ASCE)AS.1943-5525.0001473
    Publisher: ASCE
    Abstract: This article presents the results of research on sandwich materials manufactured by liquid resin infusion and designed to resist in low-velocity/low-energy impact applications. The sandwich plates are made of composites skins [glass fiber reinforced plastic (GFRP)] on a foam core. A manufacturing method was designed to produce samples in a one-shot process. Four manufacturing parameters were selected and combined: resin’s temperature, preform’s temperature, hardener type, and presence of nanoscaled additives. Their influences on the behavior of the samples during impact and the resulting damages were investigated. For each manufactured plate, nine samples were impacted with a 10 J drop-weight tower. Impacted samples were inspected with two nondestructive testing methods, visual inspection and infrared thermography. Samples were cut afterward to confirm conclusions and observe in-depth damages. Two impact behaviors and three damage types have been identified among all tested samples. The impact properties of the samples can be directly linked to the processing conditions. To ensure uniform mechanical properties, plates should be manufactured with isothermal conditions (same temperature in the preform and in the resin). If the manufacturing temperature is high enough, there is no significant influence on the impact behavior of the sandwich samples using slow or standard hardener. The higher the infusion temperature is, the more brittle the resulting composite. With nanoadditives in isothermal conditions, the resin’s viscosity is much higher, leading to a longer infusion and nonuniform properties.
    • Download: (2.987Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Impact Behaviors of Sandwich Composites Produced by Liquid Resin Infusion: Influences of the Process Parameters

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/4286465
    Collections
    • Journal of Aerospace Engineering

    Show full item record

    contributor authorJean Gulla
    contributor authorArthur Cantarel
    contributor authorMarie-Laetitia Pastor
    contributor authorXiaojing Gong
    date accessioned2022-08-18T12:20:45Z
    date available2022-08-18T12:20:45Z
    date issued2022/07/08
    identifier other%28ASCE%29AS.1943-5525.0001473.pdf
    identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4286465
    description abstractThis article presents the results of research on sandwich materials manufactured by liquid resin infusion and designed to resist in low-velocity/low-energy impact applications. The sandwich plates are made of composites skins [glass fiber reinforced plastic (GFRP)] on a foam core. A manufacturing method was designed to produce samples in a one-shot process. Four manufacturing parameters were selected and combined: resin’s temperature, preform’s temperature, hardener type, and presence of nanoscaled additives. Their influences on the behavior of the samples during impact and the resulting damages were investigated. For each manufactured plate, nine samples were impacted with a 10 J drop-weight tower. Impacted samples were inspected with two nondestructive testing methods, visual inspection and infrared thermography. Samples were cut afterward to confirm conclusions and observe in-depth damages. Two impact behaviors and three damage types have been identified among all tested samples. The impact properties of the samples can be directly linked to the processing conditions. To ensure uniform mechanical properties, plates should be manufactured with isothermal conditions (same temperature in the preform and in the resin). If the manufacturing temperature is high enough, there is no significant influence on the impact behavior of the sandwich samples using slow or standard hardener. The higher the infusion temperature is, the more brittle the resulting composite. With nanoadditives in isothermal conditions, the resin’s viscosity is much higher, leading to a longer infusion and nonuniform properties.
    publisherASCE
    titleImpact Behaviors of Sandwich Composites Produced by Liquid Resin Infusion: Influences of the Process Parameters
    typeJournal Article
    journal volume35
    journal issue5
    journal titleJournal of Aerospace Engineering
    identifier doi10.1061/(ASCE)AS.1943-5525.0001473
    journal fristpage04022076
    journal lastpage04022076-13
    page13
    treeJournal of Aerospace Engineering:;2022:;Volume ( 035 ):;issue: 005
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian