Show simple item record

contributor authorJean Gulla
contributor authorArthur Cantarel
contributor authorMarie-Laetitia Pastor
contributor authorXiaojing Gong
date accessioned2022-08-18T12:20:45Z
date available2022-08-18T12:20:45Z
date issued2022/07/08
identifier other%28ASCE%29AS.1943-5525.0001473.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4286465
description abstractThis article presents the results of research on sandwich materials manufactured by liquid resin infusion and designed to resist in low-velocity/low-energy impact applications. The sandwich plates are made of composites skins [glass fiber reinforced plastic (GFRP)] on a foam core. A manufacturing method was designed to produce samples in a one-shot process. Four manufacturing parameters were selected and combined: resin’s temperature, preform’s temperature, hardener type, and presence of nanoscaled additives. Their influences on the behavior of the samples during impact and the resulting damages were investigated. For each manufactured plate, nine samples were impacted with a 10 J drop-weight tower. Impacted samples were inspected with two nondestructive testing methods, visual inspection and infrared thermography. Samples were cut afterward to confirm conclusions and observe in-depth damages. Two impact behaviors and three damage types have been identified among all tested samples. The impact properties of the samples can be directly linked to the processing conditions. To ensure uniform mechanical properties, plates should be manufactured with isothermal conditions (same temperature in the preform and in the resin). If the manufacturing temperature is high enough, there is no significant influence on the impact behavior of the sandwich samples using slow or standard hardener. The higher the infusion temperature is, the more brittle the resulting composite. With nanoadditives in isothermal conditions, the resin’s viscosity is much higher, leading to a longer infusion and nonuniform properties.
publisherASCE
titleImpact Behaviors of Sandwich Composites Produced by Liquid Resin Infusion: Influences of the Process Parameters
typeJournal Article
journal volume35
journal issue5
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0001473
journal fristpage04022076
journal lastpage04022076-13
page13
treeJournal of Aerospace Engineering:;2022:;Volume ( 035 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record