Study of Microstructural, Physical, Thermal, and Mechanical Properties of Organic Waste–Incorporated Fired Clay Bricks in the Framework of Energy ConservationSource: Journal of Materials in Civil Engineering:;2021:;Volume ( 033 ):;issue: 005::page 04021066-1Author:Farah Anjum
,
Muhammad Yasin Naz
,
Abdul Ghaffar
,
Shazia Shukrullah
,
Kashif Kamran
,
Abdul Ghuffar
DOI: 10.1061/(ASCE)MT.1943-5533.0003683Publisher: ASCE
Abstract: This comparative study investigated the microstructural, thermophysical, and mechanical properties of tea waste–, sawdust-, and wheat husk–incorporated clay bricks. The bricks were prepared by missing clay with different amounts of organic wastes and firing at 600°C and 1,000°C. A transient plane source technique was used to measure the thermal properties of the fired bricks. The calorific values of the tested organic wastes were measured in the range of 15–17 MJ/kg. The maximum loss on ignition of tea waste–, sawdust-, and wheat husk–incorporated bricks was measured at about 14.94%, 13.75%, and 9.26%, respectively. The tea waste added–bricks exhibited the highest water absorbance, 20.8%–35.7%, among all the tested samples. The specific surface area of the tea waste–, sawdust-, and wheat husk–added bricks was measured at about 146.43, 139.47, and 167.25 m2/g, respectively. Similarly, the pore volume was measured at about 0.192, 0.184, and 0.219 cm3/g, respectively. When compared with a reference brick, the compressive strength decreased by 15%–59% for 2%–8% by weight of tea waste, by 12%–59% for 2%–10% by weight of sawdust, and 31%–69% for 1%–4% by weight of wheat husk in the brick. However, the compressive strength of the waste-added bricks was still in good agreement with Pakistan building code standards.
|
Collections
Show full item record
| contributor author | Farah Anjum | |
| contributor author | Muhammad Yasin Naz | |
| contributor author | Abdul Ghaffar | |
| contributor author | Shazia Shukrullah | |
| contributor author | Kashif Kamran | |
| contributor author | Abdul Ghuffar | |
| date accessioned | 2022-01-31T23:35:06Z | |
| date available | 2022-01-31T23:35:06Z | |
| date issued | 5/1/2021 | |
| identifier other | %28ASCE%29MT.1943-5533.0003683.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4269989 | |
| description abstract | This comparative study investigated the microstructural, thermophysical, and mechanical properties of tea waste–, sawdust-, and wheat husk–incorporated clay bricks. The bricks were prepared by missing clay with different amounts of organic wastes and firing at 600°C and 1,000°C. A transient plane source technique was used to measure the thermal properties of the fired bricks. The calorific values of the tested organic wastes were measured in the range of 15–17 MJ/kg. The maximum loss on ignition of tea waste–, sawdust-, and wheat husk–incorporated bricks was measured at about 14.94%, 13.75%, and 9.26%, respectively. The tea waste added–bricks exhibited the highest water absorbance, 20.8%–35.7%, among all the tested samples. The specific surface area of the tea waste–, sawdust-, and wheat husk–added bricks was measured at about 146.43, 139.47, and 167.25 m2/g, respectively. Similarly, the pore volume was measured at about 0.192, 0.184, and 0.219 cm3/g, respectively. When compared with a reference brick, the compressive strength decreased by 15%–59% for 2%–8% by weight of tea waste, by 12%–59% for 2%–10% by weight of sawdust, and 31%–69% for 1%–4% by weight of wheat husk in the brick. However, the compressive strength of the waste-added bricks was still in good agreement with Pakistan building code standards. | |
| publisher | ASCE | |
| title | Study of Microstructural, Physical, Thermal, and Mechanical Properties of Organic Waste–Incorporated Fired Clay Bricks in the Framework of Energy Conservation | |
| type | Journal Paper | |
| journal volume | 33 | |
| journal issue | 5 | |
| journal title | Journal of Materials in Civil Engineering | |
| identifier doi | 10.1061/(ASCE)MT.1943-5533.0003683 | |
| journal fristpage | 04021066-1 | |
| journal lastpage | 04021066-15 | |
| page | 15 | |
| tree | Journal of Materials in Civil Engineering:;2021:;Volume ( 033 ):;issue: 005 | |
| contenttype | Fulltext |