Show simple item record

contributor authorFarah Anjum
contributor authorMuhammad Yasin Naz
contributor authorAbdul Ghaffar
contributor authorShazia Shukrullah
contributor authorKashif Kamran
contributor authorAbdul Ghuffar
date accessioned2022-01-31T23:35:06Z
date available2022-01-31T23:35:06Z
date issued5/1/2021
identifier other%28ASCE%29MT.1943-5533.0003683.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4269989
description abstractThis comparative study investigated the microstructural, thermophysical, and mechanical properties of tea waste–, sawdust-, and wheat husk–incorporated clay bricks. The bricks were prepared by missing clay with different amounts of organic wastes and firing at 600°C and 1,000°C. A transient plane source technique was used to measure the thermal properties of the fired bricks. The calorific values of the tested organic wastes were measured in the range of 15–17  MJ/kg. The maximum loss on ignition of tea waste–, sawdust-, and wheat husk–incorporated bricks was measured at about 14.94%, 13.75%, and 9.26%, respectively. The tea waste added–bricks exhibited the highest water absorbance, 20.8%–35.7%, among all the tested samples. The specific surface area of the tea waste–, sawdust-, and wheat husk–added bricks was measured at about 146.43, 139.47, and 167.25  m2/g, respectively. Similarly, the pore volume was measured at about 0.192, 0.184, and 0.219  cm3/g, respectively. When compared with a reference brick, the compressive strength decreased by 15%–59% for 2%–8% by weight of tea waste, by 12%–59% for 2%–10% by weight of sawdust, and 31%–69% for 1%–4% by weight of wheat husk in the brick. However, the compressive strength of the waste-added bricks was still in good agreement with Pakistan building code standards.
publisherASCE
titleStudy of Microstructural, Physical, Thermal, and Mechanical Properties of Organic Waste–Incorporated Fired Clay Bricks in the Framework of Energy Conservation
typeJournal Paper
journal volume33
journal issue5
journal titleJournal of Materials in Civil Engineering
identifier doi10.1061/(ASCE)MT.1943-5533.0003683
journal fristpage04021066-1
journal lastpage04021066-15
page15
treeJournal of Materials in Civil Engineering:;2021:;Volume ( 033 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record